Does anyone make floating tube baits for crappies?
Printable View
Does anyone make floating tube baits for crappies?
Not I.
I do Mike the ones I sent you I do not think they float but I do have a different plastic that floats.Quote:
Originally Posted by shipahoy41
you may want to check out the ones I sent you and throw them in the water to see if they float if they don't I will send you some of the ones that do. monitor if this is not appropriate here please delete the post.
They do not float Bob. I am getting some hits on a tube on the bottom fished Carolina Rig style. I have been cutting apart styrofoam floats and wedging it in to the tube bait. Floating jigheads are ok, but I want to just float a #4 hook with a tube on it so the fish can inhale it easier. I will be a dangerous cat on the water if I can get some real floating tube baits.
Attachment 169213
Ship, if you have a couple 1" twister tails you can slice the bodies into pieces about 1/16" thick....like you'd slice a hotdog. Carefully insert the slice of body into the back portion of the tube hollow, just until the back edge of the slice and the tube body are flush with each other. The tap a tiny bit of super glue on the two. You'll create a hollow that's sealed and will float your jig.
Very interesting thought there sir. Time to put on a lab coat.:biggrin
They have some little walleye floats at BPS just made for that......you can run your line thru them and float a bait like a hook and red worm or you can put it inside of a tube jig. I have been useing them for years.
I will look into that too David.
Run to a fabric store and get a couple square inches of foam padding. Use a razor blade to cut this into strips the approximate size of the inside of a tube and slip the strips inside. Hooks will run right thru it and it will help prevent tearing since it supports the tube from inside.
Mike they do make a ball out of Styrofoam for steelhead fishing they are very small and will fit up inside skirt all see if I cannot find some and send them to you they do have a small hole that you can stick the hook through all see if I can't find some and post a picture of what I'm talking about I think that is what you're wanting to do something that will race that skirt up high ?.
Mike we are sending you some stuff in the mail.
ok Thanks. Still searching for the best idea to float that tube up in the water column on a Carolina Rig setup. A drop shot setup works but is too stationary It works well from a boat but not too good from a bank. . Floating jigheads were ok...but I just want the jig profile underwater, not the floating head and tube setup. I want the tube to move with the underwater currents so the tentacles really move. Something like a tube implant will do if I cannot find real floating tubes like the floating worm products. Someone should invent it if it does not exist.Quote:
Originally Posted by snake River
I am thinking the Carolina Rig does that.