Printable View
Any chance that someone here has an idea of where I could find a transducer for an Eagle FishEasy 320C? I realize these were discontinued long ago, but it works (or did until someone broke the transducer this weekend :rolleyes:). I have tried to Google it but haven't had any luck so far unless I am just overlooking it. Any help would be appreciated.
fisheasy-320c
Lowrance®/Eagle® Transducers - Transom Mount | Bass Pro Shops
HST-WSU is ducer you are looking for. Those are 2 separate links.
I appreicate the help Cray....I wouldn't have known to use the one labeled Cuda. Thanks!!
Quote:
Originally Posted by cray
I've got one that went to a old fishmark. I think it is a 200hz.It has a black plug and 6 pins. Here's some pics. Maybe it will help. Let me know!
That one will work SL.
I broke mine too. I feel for you Bluesraider. I tried to find one and finally gave up. I'm not paying $90 with frt and tax just for a transducer. I went ahead and updated to an Elite 4 HDI with downscan up on the bow. Someday I'll be in a boat shop and they will have an old tear-off 320c transducer (or equivalent) laying around that they no longer need and will give to me for a song. I'll keep that old 320c on the shelf until then. It's like a good old fishing buddy...been there with me when others weren't, and helped me catch a bunch of memories.
Did you find one, I've got the complete unit I'll sell for $85.00 including shipping.
Thanks Slablapper....sent you a PM
I have 2 320s, the transducers are broke off the bracket, but I have glued and zip tied them to work in a pinch. I also have a 480 with good transducer, GPS puck and older lake chip. Let me know if anyone is interested. I have the orig box and manual for 480. I'll put it all in a box and ship it.
I've got a couple of old eagle fish easy 320's...transducers are good...one unit I think is bad....I'll give them away to anyone who needs em,,,,just pay shipping...
Jody
Sent you an email golfproQuote:
Originally Posted by golfprocrappieman
Here are some pics of tranducer placement on my boat. I don't know what type of hull design you have, but I hope this will give you a idea!
You can drill a hole through the plastic on those and reuse the bracket
My hull design is a bit different....where do you suggest I mount the ducer? Just wondered since yours is pretty flat across the bottom and mine has a couple of contours.
Attachment 169516
I couldn't open the attachment. I may have some thing blocked on my computer.
Check out this hyperlink and see if any of these match your hull.https://www.google.com/search?q=tran...x-a&channel=sb
Let me try again....
Install between the drain hole and next rib to the right. Make sure that bottom edge of transducer is just slightly deeper then the bottom edge of your hull and level there is a center line on the transducer that should line up directly with the bottom edge of your hull.. The mounting bracket is slotted to allow for some adjustments. Just make sure you are level in both directions so your ducer won't be looking out to the side or to the front or back of your boat.That's a great looking boat you have there!
Another link to installation.http://www.eaglenav.com/upload/Eagle...582_041703.pdf