Anyone know a welder in the horn lake area? I need like 10 mins of work today and maybe an estimate on some trailer mods.
Printable View
Anyone know a welder in the horn lake area? I need like 10 mins of work today and maybe an estimate on some trailer mods.
Send me pics of what you need welded.
Is that galvanized aluminum?
Never heard of itQuote:
Originally Posted by torch
It's steel.
:donoQuote:
Originally Posted by torch
Be an easy fix, Probably want to have a gusset added when you get it fixed. If you were close, it looks to me like a 12 pack repair (6 for you and 6 for me) while the paint dries.
Does the right side slide into the left or what? Hard for me to tell, but it would be an easy fix either way, sorry it took so long to get back on here.
Clean the galvanized off around the weld area, very easy fix, but I would also drill about a 3/4" hole in both the top and bottom of the piece it slips into and plug weld there also............ retired welder........
The piece I am holding is welded to the piece I'm not. It is a 90 angle . It just needs welded back together and maybe a small piece welded across it as a brace.
It will not be a problem to weld back
That doesn't look like steel. If it is galvanized good luck welding it
It can be welded.....use a fan so you wont breath the fumes......they will make you sick.
The galvanize is just a coating, it burns right off as you weld.Quote:
Originally Posted by torch
if u start feeling sick they say drink some milk and it will make u feel better
6011 root with a 7018 cover will hold that forever.
X1000. Galvanized coating is poisonous when burned.Quote:
Originally Posted by "G"
Did you get it fixed?
I was gonna offer my time but I've worked from sun up til sun down all week!