I spun the hub on my prop yesterday. Anybody know where I can find a used one, or have the old ones(I have two) rebuilt in the Central Ar. area? Preferably Jax. or Cabot? It is off of a 15 horse Jonny-rude. Thanks in advance.
Printable View
I spun the hub on my prop yesterday. Anybody know where I can find a used one, or have the old ones(I have two) rebuilt in the Central Ar. area? Preferably Jax. or Cabot? It is off of a 15 horse Jonny-rude. Thanks in advance.
What does the center look like. I have a prop but not sure what motor it fits merc or johnson
Attachment 164263Attachment 164264Quote:
Originally Posted by arkansasbowhunter
You need a new prop, or a new hub assembly? New alum props are not bad, but if it wobbles when it spins, might be something more serious. Friend of mine had similar issue on a big motor hub, and H20 fixed it fine..........wasn't cheap though.
Is there splines in it Chris? I will look at mine Tuesday for ya. Gotta work till en
Yes, for where it slips over the prop shaft.Quote:
Originally Posted by arkansasbowhunter
One and the same on this rig. There isn't a sheer pin on this set up. Instead, the hub/bushing is pressed into the prop. So when it takes a hard impact, or a series of impacts, like say hitting a thousand stumps in a day's time, the hub/bushing spins inside the prop housing, instead of trashing the lower unit. So to answer your question, I guess I need a new hub assembly.Quote:
Originally Posted by Buckrub
River Valley Marina, 501-868-5869 does my Prop work and at a good price. He will have that baby looking new again. Give em a call
Hope it is different guy than one used to run it down on Little Maumelle. Took a Stainless steel down there years ago and ground blades down so thin it ruined mine.Quote:
Originally Posted by CrappiePro
Not sure where my post went?
Johns Welding Shop on Maryland near the NLR airport replaces the bushings. Used to be about $40
I think mine is mercury hub after looking at yours
Some better pics.Quote:
Originally Posted by arkansasbowhunter
Attachment 164481Attachment 164482
Let me look and take u a pix of mine
Looked around a bit sorry. All my spares are for 4 - 5 hp
did see one on flea bay http://www.ebay.com/sch/sis.html?_kw....9+15hp+%3F%3F
also a quick google search http://www.getaprop.com/content-cate...ropellers.html
At the price I see for new props even replacing the splined rubber bushing will probably be about the same.
Anyone know what kinda prop mine will fit
There is a number on the hub. Run it through google and it will tell you exactly what it came off of.Quote:
Originally Posted by arkansasbowhunter
Just checked. Looks like it is off of a Suzuki.
Ok thanks