anyone besides gomer tried this yet? need some feedback.
Printable View
anyone besides gomer tried this yet? need some feedback.
Is that the one that slides? Want to get one that slides, don't like the puck style
Think it is--looks like it's designed a little different then when I bought mine but basically the same--I like it
don't think that is it. the 47 slides back so it doesn't hit the roller on the ramp that looks like a 41.
? This is like.that
This has a stop on the back
Plus the side knob to keep all in place plus the hole for the padlock
think you have this.
http://store.minnkotamotors.com/prod...elease_Bracket
It's universal for electric or cable steers. You can mount a terrova and pull or troll. Within a minute you can swap it for a cable steer to fish the thick.
yep--u right--didn't get a good look on my phone. Mississippi is correct--I'd take either one for sure :)Quote:
Originally Posted by Gomer Snerd
My 47 bolts up to the existing holes for both min kota and motor guide motors. No need to drill new holes. Bad part...150 bucks as opposed to 65 or so.
but it is the only mount you need for many motors. i did find it for 120$.
Alright. Been thinking about this. I would love to be able to simply pull off the Terova and slip on a Cable drive. Do I need an MKA 47 or and MKA 48, or will it take both? Or does the 47 come with a 48 attached, and I will need another 48 for the cable drive tm?
You might have to buy another complete mount to get the plate that the motor bolts to. I haven't seen that part sold individually. The best part about the. Is the ability to slide back 6-7 inches so the motor doesn't hit when you launch.
You need 1 mka-47 and 1 mka-48. This will be 1 bottom and 1 top with the 47 and 1 extra top with the 48.
That is what I thought. So the 48 is what the motor mounts to, and then mates up with the 47?Quote:
Originally Posted by RCC
That's exactly right.Quote:
Originally Posted by Iwannafish
The 47 is both pieces, top plate to go to the trolling motor and the bottom to mount to the boat. The 48 is just the plate to mount to the trolling motor so you can have 2 different trolling motors to switch out as you need to.
gotta get a 48. will it ever stop??? when they lower me down I guess.....
47 is the two piece assy. 48 is upper alone.