I need da cover holdit guinae pigs for select Lowrance model units...

I need measurements and specs for select Lowrance models ...for design of da cover holdits.... Podunk Ideas - da cover holdit

Selected users will receive the version da cover holdit for that specific unit free..including installation...(after I get it designed and built of course...)

Requirements:

*Your Lowrance unit located within 50 miles of my location in Palma KY...
*You own one (or more) of the following Lowrance models ...and its protective cover...

Lowrance Touch 9
Lowrance Touch 7
Lowrance HDS 10
Lowrance Elite 7
Lowrance Elite 5 (or Mark 5)
Lowrance Elite 4 (or Mark 4)

PM me if you're interested...

I will add to this thread as each model above has been accepted for guinae pig status...

Rickie

I now have a guinae pig for the Elite 5...

I still need guinae pigs for the following...:

Lowrance Touch 9
Lowrance Touch 7
Lowrance HDS 10
Lowrance Elite 7
Lowrance Elite 4 (or Mark 4)

PM me if you're interested...

Rickie

If you like Rickie,I can give you specs for the 10, let me know what measurements you need

Quote:

---

Originally Posted by wilbur

If you like Rickie,I can give you specs for the 10, let me know what measurements you need

---

Thanks Bill....but I need an actual tracing of the cover on paper so that I can design and build a mirror mold to create/bend the curve in the aluminum attachment arm...(all of the Lowrance units seem to have a different curve in the outside edge of the unit cover...requiring me to have a separate mirror mold for each model)....

If I don't get a guinae pig locally, I may get back with you...

Thanks

Rickie

PM sent for Elite 4

Ricky for some reason having trouble sending private message, I have a HDS 10, live here in benton, give me a call 205-0191 if u still need a HDS 10

I now have a guinae pig for the HDS 10

I still need guinae pigs for the following...:

Lowrance Touch 9
Lowrance Touch 7
Lowrance Elite 7
Lowrance Elite 4 (or Mark 4)... (pending for jimp...but still taking recipients)...

PM me if you're interested...

Rickie

I now have a guinae pig for the Lowrance Touch 9

I still need guinae pigs for the following...:

Lowrance Touch 7
Lowrance Elite 7
Lowrance Elite 4 (or Mark 4)... (pending but still taking recipients)...

PM me if you're interested...

Rickie

I still need guinae pigs for the following...:

Lowrance Touch 7
Lowrance Elite 7

PM me if you're interested...

Rickie

Ok it seems I don't have a guinae pig for the Lowrance Touch 7 or the Elite 7 close to my location....

I want to open this up for anyone interested in being the guinae pig for "da cover holdit" design prototype of the above mentioned 2 Lowrance model units...

I would need correspondence back and forth until I get enough info for building the prototype...

The prototype would still be at no charge to the selected guinae pig ...(but I would have to forego the free installation because of distance from my location)....

PM me if you are interested...

Rickie

I have the Touch 12 and 9 but I'm in Ohio.

Tell me what to trace I'll do what I can for you.

Kim

Never mind, went to your site and see you already have those units covered

They look very nice

I now have a guinae pig for the Lowrance Touch 7...

I still need a guinae pig for the Lowrance Elite 7....

PM me if interested...

Rickie

Lokks like you need a CNC machine shop to me LOL

Quote:

---

Originally Posted by cajun fryer

Lokks like you need a CNC machine shop to me LOL

---

I keep hopin you'll upgrade and give me your old worn out $150,000 CNC...

:biggrin

Rickie

I now have a guinae pig for the Elite 7...

Check my website for da cover holdit available sizes...

If your unit model is listed...I have that model designed, built, and ready to ship...
If your unit model is not listed...I either have it in the design phase or the model is not conducive for da cover holdit...

Rickie

Quote:

---

Originally Posted by rnvinc

I now have a guinae pig for the Elite 7...

Check my website for da cover holdit available sizes...

If your unit model is listed...I have that model designed, built, and ready to ship...
If your unit model is not listed...I either have it in the design phase or the model is not conducive for da cover holdit...

Rickie

---

I assume you use your cover with this device. I almost bought 1 for my 998 tonight but am unsure how it attaches to the cover and is installed. Any drilling and such involved or do you simply attach it to the mounting bracket?

Quote:

---

Originally Posted by Wiskers

I assume you use your cover with this device. I almost bought 1 for my 998 tonight but am unsure how it attaches to the cover and is installed. Any drilling and such involved or do you simply attach it to the mounting bracket?

---

Terry..there are two 1/4" holes that have to be drilled in the gimbal bracket that the adjustment knobs mount to...

http://i477.photobucket.com/albums/r...pselncvp3e.jpg

Rickie