Alabama non-resident saltwater 7-day fishing license. Getting ready to go!!
Printable View
Alabama non-resident saltwater 7-day fishing license. Getting ready to go!!
Have fun, safe travels!!
Bought one last month. Pulled my boat down and the weather was bad the whole week--never put my boat in. Hope it's good for you.
Gonna pull my boat down too, hope that doesn't jinx my trip.
Gonna need a bigger boat!
Gonna fish in-shore Sat, my boat will be fine.
Careful in the salt with a boat made for fresh water. It can cause some problems down the road. But I'm sure you know what you are doing !
just keep your eye on the sky. Storms will pop up QUICK down there. TRUST ME, I learned the hard way. BTW, I shot you an email with all the bookmarks
Got em, thanks.Quote:
Originally Posted by DonDon
Good luck, and have a blast Maj. Good seeing you in Jackson this past Saturday.
Gonna take a hose and motor flusher and wash it down throughly after each time in the salt water.Quote:
Originally Posted by feeshrman
That's a good idea. I also stop on the way home at a large car wash DIY and soak the boat and carpet down with their soap and the trailer. Then use their tire cleaner on wheels and axle. High pressure clean the whole boat and carpet after brushing the soaked in soap.Quote:
Originally Posted by majflyboy
Stop at a lake on way home and leave tie downs on and back in lake with plug out. Run my bilge pump and aerator pumps while trailer and bunks are soaking in the fresh water. Run big motor also. Been doing this for 4 years now on a Triton TS18 and galvanized trailer and not one spot you can find shows any saltwater stress. Spray some WD40 or that red terminal protector spray on all the battery connections before and after too. Good luck and have fun !
+10000 Once the water get warm coming out the pee hole, I let it run for about 10-15 minutes. Gives the salt plenty of time to dissolve. Wash your TM down REAL GOOD but don't use a Huigh pressure sprayer. Just normal water hose pressure. It can push salt water inside the housing if you hit it with a high pressure hose. Same for your reels, I put the m in a big cooler and let it run for 20-30 minutes, then leave them to soak overnight or a couple days. Hit them with some oil when their all dry. No problems yet with the way I been doing it
Quote:
Originally Posted by majflyboy
Thanks for the tips Shine Runner and DD.
You now taking advice from dd??? Hehe, how many rolls of duct tape did he tell ya to take??? :DQuote:
Originally Posted by majflyboy
Hushup Rip before I come give you a smooch on the cheek. LOL