I am looking at buying a fluid bed but do not know what size to get. My jigs range from 1/64 all the way to 3/8. What size would be best for the sizes I use? Also do I need to/ should I buy a cup for each color?
Printable View
I am looking at buying a fluid bed but do not know what size to get. My jigs range from 1/64 all the way to 3/8. What size would be best for the sizes I use? Also do I need to/ should I buy a cup for each color?
If you have just basic ability, you can make your own WAY cheaper. The photo below shows the setup I copied on top & one exactly like my setup on bottom. I built mine for under $40 complete with 4 cups & 4 stations (able to use 4 colors at the same time). I found that the air pump I bought wasn't strong enough to drive all 4 stations so I closed off 2. It works great now. I started with coffee filter's as diffuser material but then I bought diffuser disc's from TJ's @ $2.50 each and super glued them to the bottom of each cup (I have 10 cups now) and they work great. The video shows my Yellow Chartreuse "boiling". Click the photo.
http://i598.photobucket.com/albums/t.../fluid_bed.jpg
http://i598.photobucket.com/albums/t..._VIDEO0003.jpg
I use the 2 in size about 2 1/2 in deep. Found that works for me but don't paint many larger than a 1/4. Like PePop I built my own. For the cost of one manufactured unit you can build a whole rack of cups. Do yourself a big favor buy the cups from TJ with filter or the disk and glue on like PePop said. Best thing I did for painting. Several videos on how to build on YouTube and somewhere in here Fatman has a real good thread on building fluid beds.
Fatman's Fluid Bed tutorial is without pictures for the time being. He's working on it. I forgot to mention, mine are 2" cups about 2 1/2" deep also. Plenty big enough for 3/8oz jigs I would think. I too don't ever go above 1/4oz but there's plenty of room in the cup, just make sure you have sufficient powder in the cup.
Bought TJ's....3" love them. Run two most of the time. I did not have time to try to build.
The 2" size should be perfect for the size you'll be painting,I make several different sizes/styles of fluid beds and cups so if you need anything just holler.
What is the advantage of running more than one fluid bed?
Two tone colors - unless you brush tap
Pepop - Get a Tetra Whisper 60 dual nozzle air pump - I run 3 -2" beds at one time and it's got power for more.
Dipping in 2 colors gives a more uniform look to the separation of the 2 colors.Quote:
Originally Posted by Michael B
This photo is of jigs dipped in two fluid beds
http://i598.photobucket.com/albums/t...ps738894b8.jpg
These are "Brush-Tapped"
http://i598.photobucket.com/albums/t...psab025631.jpg
I'll look into that pump Doug. Thanks
No problem glad to help - they do make a bigger one but make sure no matter what kind you get that it's dual nozzle output.
If you have to open the box to check, plus it drives them nuts!!!!!LOL
According to JT's tackle you can dip up to 1/2 ounce in the 2 inch cups. I have dipped up to 3/8 in mine and I could much bigger but I was over full and it was dusting all over the place.
The 3 inch cups I can and have dipped a #5 french spinner blade in them.