I'm fixing to rig out for spider rigging and was trying to decide on set up. I know I'm opening up a big can of worms, but I thought I would get some input from the masses that use or have used both:)
Printable View
I'm fixing to rig out for spider rigging and was trying to decide on set up. I know I'm opening up a big can of worms, but I thought I would get some input from the masses that use or have used both:)
Have you seen these?
Attachment 117027
Here's the link to the thread here on the board
New Spyderlok Trolling Rig
If not these, I would say Hi-Tek's
Is this setup available now, and where can I get it?
Hi tek is my vote
Dont think they will arrive from across the big pond until April. I am a little bias but I say Hi-Tek... LOL.Quote:
Originally Posted by Crappiejeff
Hi-tek
Sent from my iPhone using Tapatalk
Hi-tek
My vote go to hi-tek
I've got hitek and I love em
Hi-teck
Ht
Cumberland if you want some rod holders anytime soon. Most places I checked are out of stock on hi-tek rod holders. Contact Midsouth for the Cumberlands.
Who is out of stock? I think Home has them in stock. Wait, I know they do!Quote:
Originally Posted by Conwayslabber
Perotti built very few I would trade them for.
Talked to Scott and placed order with him. Was 99 percent sure that was the route I was going, but after all the positive feedback on Hi Tek I feel confident in my choice. Thanks for the response y'all:)
I sell hi-tec and use them also!!!!
Sent from my SAMSUNG-SGH-I547 using Tapatalk 2
I use Bee Ready Rod Holders and love them
Bee Ready Rod Holders
My vote is Hi-Tek
You can take the boy out of the country but you can't take country out of the boy
Hi-Tek is what I use I'm a guide and they are very durable and very good quality. Call Scott Echols 256-482-8509 he's a real good guy and good to deal with. Hitekstuff.com they have several other good products to.
Mid South, Ozark Rods and Hi Tek Pro Staff.
If you need some trolling poles to go in those new racks give me a call I'm a Ozark Rod dealer 501-912-2986.
Mid South, Ozark Rods and Hi Tek Pro Staff.
Hi-Tek
I use both.:fish
Hi-Teck
Hi Tek
I got a store full of Hi Teks. Send me a Pm if ya need some.Quote:
Originally Posted by Conwayslabber
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
Got 75 Ozark rods coming too!!! 50 14'ers and 25 16'ers. Had 11 of the 16's already.
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
[QUOTE=Crappiejeff;222457)
Hi tec
I use the Tite Loks, but have used and like the Hi Teks, Cumberland, Driftmasters, and even the Smiths metal racks. It's all what you get used to, and for me, the ones that look the best on your boat. They ALL work good, but the Hi Tek is the best bang for the buck!!!!'
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
Cumberland rod holders are my rod holders of choice. Fully adjustable and requires no tools to adjust.
BTW, I'd like to test drive the SpyderLok, but I want 5 holders on my rack, and don't see a way to add the center rod holder on them.
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
I tried those and they were OK, and they did work alright, but with their original holders, I had a lot of slack in the rod holders with the left and right adjustment. Not with the gear, but with the rod holder bracket. The height adjuster had some slack in it also. My thumb bolts also stripped out. Might have been my fault trying to over tighten because of the slack I had.Quote:
Originally Posted by Lkconwayguru
Their new ones are a copy of the Hi Tek.
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
:deadhorse The guy has already bought his holders.
C.J.
I'll go with my home made rod holders. I've got maybe 15 bucks max in these. Saved almost a 100 bucks to buy minners with. Have new ones on order. Will post when they come in.
I had no idea they came out with the new ones that r just like Hi-teks.... Man o man....that's something else
Their new ones are a copy of the Hi Tek.
Big River Marine
Bill Burnett
870-635-0202
I'll take 4 sets for 20 bucks each!!! :)Quote:
Originally Posted by RCC
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
Quote:
Originally Posted by Conwayslabber
Conwayslabber, still waiting to hear who is out of stock please. I need to give them a call.Quote:
Originally Posted by callshy
hiteck
I HAVE Hi Teks in stock!!!!!!!!
Big River Marine
Bill Burnett
870-635-0202
We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers
Hi-Teks are as good as the best (most expensive) and better than the rest!!!
My take on Rod holders is there are several great brands out there and just about every one of them will serve you well.