HB Heading Sensor Puck Issues
OK. I've been reporting this for a few weeks, but now I will confirm that it is a hardware issue.
A buddy of mine got the new HS puck and reported these same discrepancies between his unit connected to the HS puck versus his ipilot remote and his lowrance unit at the bow.
I've see discrepancies between the puck versus my ipilot remote and my 898 console unit. The ipilot and console unit will be exactly the same speed but the HB 898 connected to the HS puck will be off on occasion.
The console unit is updated to the latest revision similar to the bow unit.
We were both slow trolling at around 0.5 mph with the HB unit connected to the HS puck showing speeds around 0.2-0.3. This is only occasionally, but noticeable.
I'll be making a call on Monday.
Re: HB Heading Sensor Puck Issues
Maybe use the paddlewheel speed sensor? :-)
I know, with the puck costing that much, it should be accurate. I still think those things should be less than $100.
Re: HB Heading Sensor Puck Issues
It was a joke on the paddlewheel. :)
Re: HB Heading Sensor Puck Issues
The paddlewheel will give you water/current speed, not necessarily ground speed. From what I've heard, not very accurate.