Printable View
The bait holder barb on some jig heads is hard for me to remove. I vertical fish almost exclusively and use only the jigs that I tie. The barb is in the way for the thread and chenille and also interferes with the balance of the jig. I am using wire cutters to remove the lead barb but this is a real pain in the caboose. Help is appreciated!
The easiest way is not to buy that type of jighead. ;) It's not meant for tying.
:cheers2Quote:
Originally Posted by deathb4disco
There's probably an easier way to remove the barb than wire/side cutters.........but I never found it in the times I removed the barb. Like mentioned above, if possible buy the barbless, less trouble and you don't mess with the weight of the jighead.
The collarless, or ball heads are much easier to use and designed for tying. Sometime in you travels get some single ground side cutters, like are used for removing the excess from poured jigs. Only being ground on one side you can get right next to the area you want to keep and cleanly remove the rest. Well worth the $.
I use a gate cutter made by Gudebrod to remove the spike when I am tying jigs.
I do use plastic grubs from time to time so I buy molds with a collar and spike. This give me the broad option of both worlds.
mashing it down with smooth pliers works better than cutting.
"I use a gate cutter made by Gudebrod to remove the spike when I am tying jigs."
Look at walmart, fabric and craft stores. In the craft section, where the jewelry making stuff is, "wire cutters". I have a pair of gate cutters from Jann's and walmart, they are just the same.
X2 on mashing down.Quote:
Originally Posted by Yodibuzz
I usually buy the collarless heads for tying, but last year the local Cabela's store had a blowout sale on collared heads. At 15 for $0.50 a pack, I just couldn't resist and bought as many as I could find in panfish sizes. So I have around 300 heads with barbed collars. I just grab the barb with a pair of needlenose pliers and twist. It usually pops right off.
It's best to have a few different styles to choose from.
http://i285.photobucket.com/albums/l...4/PB270062.jpg
NightProwler
The best thing is to not tie with that type of jig head. Save them for plastic tails and grubs.
But if you have a lot of them and must tie with them, the absolute best way to remove the barb is with
a Dremel motorized tool, with a small stone grinding attachment. It will get rid of that barb in about 2 seconds!
Smoothly and cleanly.... forget side-cutters or pliers.
What? Doesn't everyone own a Dremel?
I've had one for about 20 years - - comes in handy for lots of things.
I have tried tying on this type of collared jig head and it is a pain in the butt!
Thread slips out of place, chenille will not wrap properly . . . jeez!
Small side cutters bro. Takes 5 seconds. Three cuts at most. First around head base to seperate. Second cut parallel to hook shank from bottom. If other side doesn't just fall off, give it a tug or cut it.
Lemme know if you need more help and ill get u some pics.
x2. that's what I have been doing, and so far it's worked for me. But then I'm new at tying....
The easiest way I've found is with fingernail clippers, too easy and quick...