Why is my ssi locking up like this some days it will do it once some days it will do it a dozen times. Temp or depth dosent seem to bother itAttachment 113636
Printable View
Why is my ssi locking up like this some days it will do it once some days it will do it a dozen times. Temp or depth dosent seem to bother itAttachment 113636
1. Do you have the latest software in your HDS unit?
2. Can you take picture of your lss-1 transducer and show how its mounted.
3. try a different ethernet port on your lss box.
4. also take it off auto range on the left and right scan. see if that helps too.
5. by change can you borrow another ethernet cord..if so, try running that one between the box and the unit.
Scotty, is your transducer mounted on the TM? I see some oscillations on the screen that shouldn't be there unless it is TM mounted. The oscillations would be where the white line widen on the SI. Just curious.
That could be the TM noise that may be causing the problem. Not sure. Check the next time out and see if the oscillations appear when engaging the TM. Noise can lock the unit on occasion.
Something is going on causing that disturbance on the screen. My observation only.
Scotty, were you turning hard left or right? Also put a little di electric grease on your connections. <*)}}}><
I think your lss transducer is picking up the 2d transducer..going by your picture..
Does it do this on 455khz also ?
Hard for me to believe 2d interferes with si/di, but Jesus walked on water. Unplug the 2d.
The 2d transducer might be blocking the SI signal thus getting a double echo
It was my understanding that all pings were serially time slotted.
I see. I was wrong anyhow. Seems SI/DI is a fixed ping and ping is only adjustable with the 2d. Now I understand why 2d/si overlay only works in the "normal" scroll setting. I had to dig this up.
I am puzzled with this particular complaint. I wanna know so I will know what to do if it happens to my stuff (and others too).
Keep us informed scott. I dunno.
Why would any signal blocking cause a lockup? Why would it not be consistent? Where is the "blockage on scotts snapshot?