Water pump

Where the best place to have a water pump put in a old 1994 25hp evinrudge. I think mine has went out. Water is not coming out squirt tube. And it not letting water come out block either.

Have you checked to make sure P hole is clear? Pull cowl and remove rubber hose to discharge at side of motor, run small wire through to make sure it is clear and blow through hose to make sure it is clear. If you have muffs or barrel try running with hose disconnected to see if it really isn't pumping.

They are not hard to change out your self.

Quote:

---

Originally Posted by cray

Have you checked to make sure P hole is clear? Pull cowl and remove rubber hose to discharge at side of motor, run small wire through to make sure it is clear and blow through hose to make sure it is clear. If you have muffs or barrel try running with hose disconnected to see if it really isn't pumping.

---

I have done all that with no water running out if motor.

Creekstick I not to sure i know how to do it. I sure mess up with out some help with it.

Gindog check your pm box

If you are in the Conway aera Stan Dickerson at Dickerson Marine just north of Wooster will do a good job.

harrisons devalls bluff does all my work

Google it on u tube save yourself money. They are easy to do and with the video help a no brainer


Jigaholic Prostaff
B an M PST
Hi-Tek rod holders
Xpress Crappie Edition
Lowrance HDS 8 an 10

I did not think about that. It look easy to do on the videos I may try to take it on. Thanks

Hello, I think I can help ya. Call or PM me.


Big River Marine
Bill Burnett
870-635-0202

We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers

Thanks Bill at Big River Marine far the help. Guys Bill and I had some calls back and forth. After Bill told me and watching some YouTube videos. I know I could do it. If I every get over by Memphis I will be stoping by to shake his hand. In you are over in east ark make sure you give him a try on all your boating needs. Thanks Bill and the Bill Big River Marine

Quote:

---

Originally Posted by Gindog

Thanks Bill at Big River Marine far the help. Guys Bill and I had some calls back and forth. After Bill told me and watching some YouTube videos. I know I could do it. If I every get over by Memphis I will be stoping by to shake his hand. In you are over in east ark make sure you give him a try on all your boating needs. Thanks Bill and the Bill Big River Marine

---

Don't make his head any bigger than it already is.:Rofl

Quote:

---

Originally Posted by creekslick

Don't make his head any bigger than it already is.:Rofl

---

Shaddup Gewber!!!! Lol


Big River Marine
Bill Burnett
870-635-0202

We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers

Quote:

---

Originally Posted by Gindog

Thanks Bill at Big River Marine far the help. Guys Bill and I had some calls back and forth. After Bill told me and watching some YouTube videos. I know I could do it. If I every get over by Memphis I will be stoping by to shake his hand. In you are over in east ark make sure you give him a try on all your boating needs. Thanks Bill and the Bill Big River Marine

---

Thanks Gindog, glad I could help ya. Call me anytime!!!!!


Big River Marine
Bill Burnett
870-635-0202

We sell XPRESS, EXCEL, and ALWELD Boats. Yamaha, Suzuki, Evinrude, Mud Buddy, and Tohatsu/Nissan Engines.
Pro Staff, Southern Pro Tackle and Ozark Rods.
Member, Tri-State Crappie Anglers