Printable View
I'm thinking about buying telescopic rod storage tube and sounder if any of you use them and what you got. I need to put 6 pst's in it. 2 pst 82's, 2 pst 122's and 2 pst 163's so it has to be at least 6' long and 4" in diameter.
Trying to prevent another dog incident.
Member, Tri State Crappie Anglers
I have one from the green carp days and it will actually adjust as far as length. Had 8 rods in it last time I went to Tibby.
PVC pipe gewber.
What Wannabe said gewber
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
I made a couple out of 4" PVC a cap glued on one end and a threaded piece glued on the other end with a screw top cap. The adjustable ones seem nice, til they get jammed in the extended cab of a pickup and when the third door closes it collapses just 1 inch. That one inch give will snap a tip at best.
What Wannabe said
I hate to say this out loud but go with WB and G
Well that will work for all you cheap broke behinds... But I was looking to buy one... I get 4" pvc from werk and that's too crude... I want somthing nice... I looked at some at sportsmans and they don't cost that much... $40 - $70....
Member, Tri State Crappie Anglers
The schedule 40 pvc is a lot stronger than the bought ones.....and a lot more dog proof too. You can take the money that you save and buy more crankbaits.
Huh....buy crankbaits
Buying crankbaits sounds like a plan to me.
Ok ya talked me into it...
Member, Tri State Crappie Anglers
I bet you could buy a Dog Chain a little cheaper than the PVC.
Don't tie up dog...
Member, Tri State Crappie Anglers
Me either.Quote:
Originally Posted by Gator_1
If going to own a dog why tie it up. Never understood way people get dogs to just tie them upQuote:
Originally Posted by Gator_1
Sent from my SGH-T989 using Tapatalk 2
Or put em in a 6X6 pen, didnt own a lab till I move out in the country. Heck our lab has her own recliner!!!
[QUOTE=Gator_1;1963771]Well that will work for all you cheap broke behinds... But I was looking to buy one... I get 4" pvc from werk and that's too crude... I want somthing nice... I looked at some at sportsmans and they don't cost that much... $40 - $70....
I'm not that cheap! I'll spend the 15 or 20 dollars to make a good one instead of buying some fancy cheap one. I have 8 ammo tubes buried in my flowerbeds that we made years ago. They cost about 50 to make, I could have spent over a hundred for each.
I'll make anything before I'll buy it.
Found one that's made out of aluminum with dividers in it for 8 rods. It expands to 7'6" which is plenty.,
Member, Tri State Crappie Anglers
Pics?Quote:
Originally Posted by Gator_1
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
I read it wrong "G" it is only 72" not 7'6"... But I still like that it will hold the reels too. All the dividers are moveable.Quote:
Originally Posted by "G"
http://img.tapatalk.com/4838bd31-3a2c-dfec.jpg
Member, Tri State Crappie Anglers
Driftmaster's Pro Staff
It's also overseas... Don't like that. Want to find something like it here!
Member, Tri State Crappie Anglers
Driftmaster's Pro Staff
Pretty nice. I still like the pvc pipe though. I keep a full set of poles ( 8)in the back of my truck under my bed cover most of the time and I have been afraid they might get banged or hit on something so I am going to make up some pipe storage tubes.
I have a Bazooka by Flambeau, and I like it very well and before ya'll give me a hard time for for buying one, other than making one, I picked it up at a yard sale unused for $5.00 couldn't buy the PVC for that. I also know that doesn't happen every day I think the lady said bought it for a trip that never happened!
lucky guy, lolQuote:
Originally Posted by oldbigun
Thats what I have, works great in the spring when on the four wheeler in the lake bottom. Strap it on and if riding a long way have what rods I have with me in there and then when just moving a little it has at least one spare rod and a spinning rod and reel in it.Quote:
Originally Posted by oldbigun
Man, I'd hate to rig all my poles every time I went fishin. I guess if ya just go once a month tho, it'd be ok.
Big River Marine
Bill Burnett
870-635-0202
Member-- Tri-State Crappie Anglers
Pro Staff-- Southern Pro Tackle, Meatgetter Jigs, Minner Critters, Ozark Rods, and Crappieholic Apparel.
[QUOTE=canebreaker;1963944]You got any pics of ammo cans? Would like to see those, i got so many guns and ammo and wife told me "NO MORE SAFES".Quote:
Originally Posted by Gator_1
Sent from my SGH-T989 using Tapatalk 2
I got 2 new guns. Starting to load for them. I need to make some new tubes for their ammo. I'll bring one on the 14th.
Y'all don't forget about the Tri-State Crappie Anglers meeting on the 10th. You can show it to him (and the rest of us) there!!!!
Big River Marine
Bill Burnett
870-635-0202
Member-- Tri-State Crappie Anglers
Pro Staff-- Southern Pro Tackle, Meatgetter Jigs, Minner Critters, Ozark Rods, and Crappieholic Apparel.
Seen several of the adjustable types get accidently adjusted smaller to the demise of several rod tips.
PVC drain/sewer pipe is cheaper than regular pvc, yet plenty crushproof.
I like one or two rods per tube, get more than that and it gets messy and time consuming trying to match tips and butts up (I usually color dot mine to keep each set together).
I have a fly-fishing buddy, who paints his pvc tubes to look like brown and rainbow trout skins, so you can decorate them up.
Attachment 95371
You could paint Gewber on em too!!! Lmao
Big River Marine
Bill Burnett
870-635-0202
Member-- Tri-State Crappie Anglers
Pro Staff-- Southern Pro Tackle, Meatgetter Jigs, Minner Critters, Ozark Rods, and Crappieholic Apparel.
Bring some paint and we'll paint a Gewber at the meeting.Quote:
Originally Posted by BigRiverMarine