Hey Satdoc and Triton, take a look at these and give me yall's thoughts

on them, some have sz 2 spinner blades, some have sz 3 blades. Also, have some sz 1 split rings and sz 2 ones also. Just go easy on me as Ima still a learnin :biggrin

Attachment 93076Attachment 93077

i think they look great the eyes look really good

Thanks Donnie, I probably wont do them all that way as that takes more time to paint the eyes and then coat the eyes with epoxy to help them not chip off. but I am just pouring 12 at a time in the colors I want and just learning what Im doin


maachuu

Nice work Larry.

I think you already learned, Larry, they look great.

Yeah, nice as ussual Larry, very nice!!

Looking good but then again i wouldn't expect anything less:)


Sent from my iPhone using Tapatalk

They look Great Dude!!!!

I wouldnt do anything differant they loom fine cept for them funny lookin hooks:D

Sent from my SCH-I500 using Tapatalk 2

Good job Larry... You are multi talented!

Sent from my HTC EVO 3D using Tapatalk 2

Good job Larry

Quote:

---

Originally Posted by satdoc1

I wouldnt do anything differant they loom fine cept for them funny lookin hooks:D

Sent from my SCH-I500 using Tapatalk 2

---

Hey Sat, I got some of them red (prick yourself everytime) kinda ones but wasnt about to post them and have you rip me up here for tryin to copy your work :biggrin

thanks to all for the compliments, it proves that probably Ray Charles, Helen Keller or Stevie Wonder could do it LOL but honesty, was just concerned of the size of the split rings and blades, some have #3 blades and others #2 and didnt know exactly which one would work best, dont want the blade to overwhelm the head its self and I will be longlining with these and was wandering which size blades would pull the best

thanks again guys for all the compliments. Just like workin with this kinda stuff, now gotta get back to paint some cranks, got a couple orders Im workin on and waitin on BRM to gimme his colors


Larry

Quote:

---

Originally Posted by maachuu

Hey Sat, I got some of them red (prick yourself everytime) kinda ones but wasnt about to post them and have you rip me up here for tryin to copy your work :biggrin

---

Now why would Sat do that? Oh!! Cause you are..( :

Quote:

---

Originally Posted by slimeyslab

Now why would Sat do that? Oh!! Cause you are..( :

---

nah not copyin sat or triton, they pour 1/8 and all I got is 1/4, I dont know if I could pour the 1/8 since these 1/4 causes me to fry the end of my fingers when I load the swivels :)

Sat, I believe you told me once that you worked on your mold so you could use a sz10 swivel, is that correct ?? man these sz12 are a booger to get in place since they are so small


maachuu

Quote:

---

Originally Posted by maachuu

nah not copyin sat or triton, they pour 1/8 and all I got is 1/4, I dont know if I could pour the 1/8 since these 1/4 causes me to fry the end of my fingers when I load the swivels :)

---

U gotta start somewhere... We're watching you

Quote:

---

Originally Posted by slimeyslab

U gotta start somewhere... We're watching you

---

ahhhhhhh well quit it LOL dats why Im so nervous when Im pouring LOL

Larry I have tried those bigger blades on the ones I got from Sat and haven't had much luck with them. I am using mainly 1 and sometimes 0. I think though is with that 1/4 and long lining each size you go up will give you more lift thus changing the depth they will run at a given speed. Colorado more lift willow less. As usual the are impressive wish I had just a little of your talent.

Quote:

---

Originally Posted by cray

Larry I have tried those bigger blades on the ones I got from Sat and haven't had much luck with them. I am using mainly 1 and sometimes 0. I think though is with that 1/4 and long lining each size you go up will give you more lift thus changing the depth they will run at a given speed. Colorado more lift willow less. As usual the are impressive wish I had just a little of your talent.

---

Thanks Cray, I have #2 and #3 blades on them right now, so you think that I might go down to a #1 blade ??

Think they look great!!!

Quote:

---

Originally Posted by maachuu

Thanks Cray, I have #2 and #3 blades on them right now, so you think that I might go down to a #1 blade ??

---

I think so but I would sure try some and see how they work though. Try and figure what depth each would run at a given speed. Another thing I would suspect those bigger blades are going to attract those green carp also. They seem to like those pony heads also. Gabowman has some post on how to set up for long lining and has some pretty good info on figuring out what depths you would be running at certain speeds and weights. You could use same techniques and try different blade sizes to see how they run.

Great looking baits!

Those look really good Larry.

Quote:

---

Originally Posted by cray

I think so but I would sure try some and see how they work though. Try and figure what depth each would run at a given speed. Another thing I would suspect those bigger blades are going to attract those green carp also. They seem to like those pony heads also. Gabowman has some post on how to set up for long lining and has some pretty good info on figuring out what depths you would be running at certain speeds and weights. You could use same techniques and try different blade sizes to see how they run.

---

Thanks Cray, will order #1 next time I order some blades, thanks for the info :)


Larry

Quote:

---

Originally Posted by oldbigun

Great looking baits!

---

Thanks Joel, will let you use some of them sometime LOL

Quote:

---

Originally Posted by majflyboy

Those look really good Larry.

---

Thanks Maj :)

Quote:

---

Originally Posted by spiderwoman

Think they look great!!!

---

Thank you Maam :)

Nice job Larry.


Big River Marine
Bill Burnett
870-635-0202

Quote:

---

Originally Posted by BigRiverMarine

Nice job Larry.


Big River Marine
Bill Burnett
870-635-0202

---

Thanks Bill, read your pm's or text dadgummit :biggrin

Looks good, would work well on them sunny days

Quote:

---

Originally Posted by Spawn

Looks good, would work well on them sunny days

---

thanks spawn :)

I am using only #2blades on mine they seem to match up nicely with the 1/8 oz. I used a dremil tool to do a small modification to the mold in order to use the #12 swivel and the 1/0 sickle hook.

Sent from my SCH-I500 using Tapatalk 2