Bout Got Er Done

Well I just need a few more tweaks of the jack plate and I'll be ready. I ain't no photographer so these pics are the best I could wit my phone.

http://tapatalk.com/mu/4b412db2-c804-73d0.jpghttp://tapatalk.com/mu/4b412db2-c81b-899d.jpghttp://tapatalk.com/mu/4b412db2-c83a-9b50.jpghttp://tapatalk.com/mu/4b412db2-c85a-874a.jpghttp://tapatalk.com/mu/4b412db2-c870-dd71.jpghttp://tapatalk.com/mu/4b412db2-c89d-38ca.jpghttp://tapatalk.com/mu/4b412db2-c8b3-c49a.jpghttp://tapatalk.com/mu/4b412db2-c8d8-68f3.jpghttp://tapatalk.com/mu/4b412db2-c8f4-fd1a.jpghttp://tapatalk.com/mu/4b412db2-c914-0552.jpg

question, why the bench type seats across the front when there appears to be three petestal already there...........

Quote:

---

Originally Posted by windstone

question, why the bench type seats across the front when there appears to be three petestal already there...........

---

I just like being able to move the seats to balance the boat. I'm a big guy, so I can move the seat frame left or right to adjust for lighter or heavier people. I can also offset the frame if someone is shorter or taller. It is stronger than a pedestal also, and if we're pulling from the side or rear we can move it to the rear deck without cutting holes for the extra bases.
http://tapatalk.com/mu/a6cd0d1b-d81d-3751.jpg
This pic got left off the first batch.

I also use the seat frame and seats for Campin, Huntin, Cookin Out, Tail Gatin, In the back of my Ranger or Pickup, office furniture, and anywhere else I need an extra few seats, like at fall camp.

Sweet ride no doubt

Get rid of the frame, look's like frayser!! Don't need it. You can't
Get in the the front box.
Besides that, looks buyable!!!!!

Looking good BRM.

You coming down this weekend?? Looks like I need a test ride Sunday morning but we aint using them yellar thangs!!Thumbs Up

Quote:

---

Originally Posted by TUSHHOG

Get rid of the frame, look's like frayser!! Don't need it. You can't
Get in the the front box
Besides that, looks buyable!!!!!

---

You CAN get in both of the front boxes. FRAYSER???

You ignoring me????:mad:
I like the snot out of them seats, what would a couple of them set me back??

Quote:

---

Originally Posted by Rees Guide

You coming down this weekend?? Looks like I need a test ride Sunday morning but we aint using them yellar thangs!!Thumbs Up

---

I gotta do that catfish thang. I'll be comin next weekend though. Test ride will be great!!!! I'll bring your transom saver with me. Aint sure about the yeller thangs???

I might slip off tomorrow afternoon late, but it ain't lookin good.

I'll have to get a price on em Monday. They came in an interior package.

Quote:

---

Originally Posted by majflyboy

Looking good BRM.

---

I did it just for you Maj. LOL

Was talkin bout them minner buckets!!RoflRofl

Rees, I had to go back and look at what was yeller. I gottcha!!!

I have been looking for something like those seats. if you can get some , i might be interested in buying a set.

Quote:

---

Originally Posted by BigRiverMarine

You CAN get in both of the front boxes. FRAYSER???

---

Frayser.... North East memphrica!!! Looking at the pic the foot is on the lid, Or is that a bungie cord?

Going to bed.... Butla is calling!!!

Quote:

---

Originally Posted by TUSHHOG

Frayser.... North East memphrica!!! Looking at the pic the foot is on the lid, Or is that a bungie cord?

---

Rubber Rod strap on the right side. I know where Frayser is, I live in West Memfrica. I sell a bunch of them frames, but thats the first time I've heard that analogy!!! It ain't near that bad. LOL.

i woulc be interested in one of the frames dont need seats.

Quote:

---

Originally Posted by Deroc

i woulc be interested in one of the frames dont need seats.

---

PM sent

on the rod holder on the left front of your boat do you have to remove it to get your TM up and down????????? i have a problem with mine.

Quote:

---

Originally Posted by windstone

on the rod holder on the left front of your boat do you have to remove it to get your TM up and down????????? i have a problem with mine.

---

Naw, the Terrova slides under it real easy.

The only issue I may have is launching on a steep ramp. The TM sticks out, and may catch the bow roller. I'm thinking about putting a removable TM mount on it for those times. The one where you leave the rectangle piece on the boat instead of the slide on model. I wanted my TM as close to the end of the boat as possible so it wouldn't pull off center so bad. They used to make a bracket that slid back out of the way and then slid back into operating position after you launched. I had one on my Ranger back when the Auto Pilots first came out, but haven't seen one of those in quite awhile now.

Very nice ride Big River!

Quote:

---

Originally Posted by BigRiverMarine

The only issue I may have is launching on a steep ramp. The TM sticks out, and may catch the bow roller. I'm thinking about putting a removable TM mount on it for those times. The one where you leave the rectangle piece on the boat instead of the slide on model. I wanted my TM as close to the end of the boat as possible so it wouldn't pull off center so bad. They used to make a bracket that slid back out of the way and then slid back into operating position after you launched. I had one on my Ranger back when the Auto Pilots first came out, but haven't seen one of those in quite awhile now.

---

Boat looking good for sure. About the TM hitting the bow roller, I found that if I slow way down as the back of the boat begins to float it is no longer a problem. Give it a try, might work for you too.

Quote:

---

Originally Posted by majflyboy

Boat looking good for sure. About the TM hitting the bow roller, I found that if I slow way down as the back of the boat begins to float it is no longer a problem. Give it a try, might work for you too.

---

Maj, you already got it figured out bout as well buy it.

My pics make the boat look way narrower than it really is. This is a WIDE boat, and I can't wait to show it to y'all. See ya at Grenada next week. I'll be the fat guy in a red Xpress. LOL

Thanks Maj. I'll give that a try. I haven't had a problem yet, just trying to figure out if I might have one. I did lower the bow roller so when I crank her down hard it pulls the bow down about 6 inches. When I release the strap, the bow comes up and the TM clears the roller.

Bigriver that boat is really taking shape nicely...good work!!!!!!!!!!!

Thanks Tman.