Printable View
I got some electrical problems on the boat 1st i cut my trollin depth finder with the trollin motor and 2 i broke the rear sonar off the driving monitor and 3 my live well keeps blowing fuses
or it has a short in it, it works one day and wont the next and i suk at wiring
I think we have a resident Pro on here in Big River Marine. I would take a chance on splicing the transducer people have done it before with success. The livewell problem may be hard to find since it is intermittent. BRM said in another post to make sure the pump is not getting gunked up. I'm not sure what you mean about breaking the rear sonar, is it a physical connector on the head, or the transducer? Sounds like you and Zettler had about the same run of luck. You can take a look at his post in the electronics forum.
Hope you get it worked out and are back fishing soon.
Yea i hit a tree with the rear one the wire is kinda out and some jelly lookin mess is oozing and it broke the holder off
And the front one i cut sand tried to splice it had 5 wires but the white wasnt connected to the finder
My livewell was doing the same thing. I pulled the pump and found a pecan shell had been sucked inside the pump. I removed it and she's good to go. Might just have some trash in your pump
I suggest buying a new transducer they are not too expensive. You can splice it but it will quit working right when you need it.
That's exactually what it was I'm gonna see about some sort of screen or something that's the 3rd time I replaced that pump and didn't even check that man o manQuote:
Originally Posted by general1123
You have some kinda trash in your pump.
Yup got it out goes any1 put screen infront of it or anything
Get one like this.
Stainless Steel Wire Mesh Aerator Pump Screen Strainer | eBay
sweet thanks