New Rod Rack

Printable View

03-16-2011, 05:20 PM
E-Z Poleholder

New Rod Rack

Please check this out in the classifieds.http://www.crappie.com/crappie/perso...-rod-rack.html
03-16-2011, 06:52 PM
majflyboy

And guess whose boat that new set is on??? These are definitely the best of the best, the individual hanger brackets are adjustable and the brackets can hold 2,3,or 4 rods each. These are da ones.
03-16-2011, 06:57 PM
Cray

Quote:

Originally Posted by majflyboy

And guess whose boat that new set is on???

That wouldn't be on a new Seaark would it Major :rolleyes:
03-16-2011, 06:58 PM
majflyboy

Quote:

Originally Posted by cray

That wouldn't be on a new Seaark would it Major :rolleyes:

No sir, Pro Crappie 175.
03-16-2011, 06:59 PM
satdoc1

So a rack to hold 16 poles woul be 135.00 if I am correct.
03-16-2011, 07:05 PM
majflyboy

Quote:

Originally Posted by satdoc1

So a rack to hold 16 poles woul be 135.00 if I am correct.

Sat, I'll let EZ answer that but I wanted to tell you that this new rack has a narrower profile, that's what I like about it the most.
03-16-2011, 07:09 PM
"G"

They look great
03-16-2011, 07:12 PM
Cray

Quote:

Originally Posted by majflyboy

No sir, Pro Crappie 175.

Well sir it is a nice looking set up for sure Hands Clapping
03-16-2011, 07:19 PM
majflyboy

Quote:

Originally Posted by cray

Well sir it is a nice looking set up for sure Hands Clapping

Thank you.
03-16-2011, 07:33 PM
"G"

Yep....ol Major has a really nice setup
03-16-2011, 07:36 PM
majflyboy

EZ's internet service is out at his house right now, he'll be on in a few to answer your question Sat.
03-16-2011, 07:48 PM
tritonman

Maj has a great rig for sure! Now we just to teach him how to fish with baits other than cranks....lol
03-16-2011, 08:03 PM
satdoc1

What did you do with the set you had on your boat Maj?
03-16-2011, 08:09 PM
E-Z Poleholder

Thats a good one, tman..
I tried and tried to figure out how to price these things, but that sounds about right to me. That would be correct Sat, $135 for the set that holds 16 poles. However, an 18" riser might not be tall enough for you on the front, so you will have to let me know if that is what you want. Don't you have a 175 like Maj? If so, the front one needs to be 5 inches longer.
03-16-2011, 08:09 PM
E-Z Poleholder

Quote:

Originally Posted by satdoc1

What did you do with the set you had on your boat Maj?

I took them back for resale at a discount..
03-16-2011, 08:23 PM
ScottV

You da man Gene. You surely do some good work. They look great on your boat also Major.
03-16-2011, 10:15 PM
EmptyStringer

We're gonna have to talk really soon. Wait.. I guess I'm gonna have to buy more than 4 poles to justify getting the racks. Oh well just more money
03-17-2011, 04:22 AM
tritonman

Man up some more ES
03-17-2011, 07:24 AM
DonDon

I didn't pay real close attention Maj but was thanking. Scary huh? What do you do when you have cranks out with the rods? Seems the one's that are not being used would get in the way to getting your poles out when pulling
03-17-2011, 08:56 AM
"G"

Its no big deal DD....just reach over them and lift your pole out of the holder or put it back in the holder.....Its a lot easier than it looks like the angle that picture was taken.
03-17-2011, 09:12 AM
E-Z Poleholder

1 Attachment(s)

Thanks "G", and DD I mounted mine below the pullin rods and the storage rods haven't gotten in the way at all. Maj wanted his higher so he could get into this storage box, not an issue with mine. Good thing is, they are so adjustable and can be added to or changed with little or no effort and the whole thing can be removed with no effort, just loosen the keeper knob and remove it from the base.
Attachment 57076
03-17-2011, 09:18 AM
creekslick

EZ what size is the up right square tubing?
03-17-2011, 09:24 AM
E-Z Poleholder

The stem is 3/4" 16ga steel and the receiver is 1" 16ga steel as well. Standard length for the stem is 18" but can be longer if desired. What you do after you have installed the desired holders, and adjusted the spacing between to your likeing, you can measure and cut off the bottom of the stem.
I'm gonna go to aluminum one of these days, but not in the near future, can't get the cost right at this time.
03-17-2011, 09:26 AM
majflyboy

Quote:

Originally Posted by DonDon

I didn't pay real close attention Maj but was thanking. Scary huh? What do you do when you have cranks out with the rods? Seems the one's that are not being used would get in the way to getting your poles out when pulling

I put the 6 rods I'm not using in vertical holders (rocket launchers) and they are completely out of the way. Don't have to reach over or under.
03-17-2011, 09:02 PM
Hook One

Works looks like.
03-17-2011, 09:07 PM
"G"

Maj....have you got a pic of your rocket launchers? I would like to see where you located them etc.
03-17-2011, 09:13 PM
majflyboy

Will take a pic for u tomorrow, G.
03-17-2011, 09:14 PM
"G"

Thanks Maj
03-18-2011, 07:05 AM
Cray

Quote:

Originally Posted by EmptyStringer

We're gonna have to talk really soon. Wait.. I guess I'm gonna have to buy more than 4 poles to justify getting the racks. Oh well just more money

ES the way he has that setup built you could get one with 4 pole holder then add to it as you add more poles.
03-18-2011, 04:43 PM
majflyboy

1 Attachment(s)

G, here is the pic you wanted of my rocket launchers.

Attachment 57180

The two on the left are for the poles, the one on the right is for seat pedestals.
03-18-2011, 04:55 PM
longliner

Great looking set up there Maj, my only question is can you possible get any more equip. in that little boat? I have a 20' boat and can't imgine having that much fishing stuff in my boat!!! Anyway good looking rod racks.
03-18-2011, 06:43 PM
majflyboy

I got it pretty well organized Monk, but I am considering and bigger boat.
03-18-2011, 06:53 PM
"G"

Quote:

Originally Posted by majflyboy

G, here is the pic you wanted of my rocket launchers.

Attachment 57180

The two on the left are for the poles, the one on the right is for seat pedestals.

aha on the side of the rod locker.....good deal , I like it. Thanks Maj....now I know what to do.
03-18-2011, 06:55 PM
majflyboy

Glad I could help G.
03-18-2011, 06:58 PM
"G"

Your a big help Maj....you flat know how to set a boat up....you da man!
03-19-2011, 10:11 PM
sac-a-lait

Scott, show um what rocket launchers on a crappie boat really look like!
03-20-2011, 07:31 AM
"G"

Quote:

Originally Posted by sac-a-lait

Scott, show um what rocket launchers on a crappie boat really look like!

I know....I have fished out of Scotts boat....you did rig it up right as well.
03-23-2011, 02:40 PM
E-Z Poleholder

Please check out a better explanation of how the rod carrying rack works.
Thanks
http://www.crappie.com/crappie/perso...ml#post1459929
03-26-2011, 09:41 AM
E-Z Poleholder

I am now a Sponsor Member, so please check this out...
http://www.crappie.com/crappie/spons...-rod-rack.html
03-26-2011, 11:20 AM
Hook One

Nice EZ