Help with Trolling Motor Damage

Printable View

03-12-2011, 07:19 PM
marshjohn

Help with Trolling Motor Damage

Well guys I committed one of the most embarrassing errors that a fisherman can make. I forgot to pull my Motorguide trolling motor up before taking off full throttle with the outboard. It took me a while to understand why I was getting soaked with lake water, but I finally figured it out. :(

Now to the damage part. The trolling motor is now extremely difficult to turn with the foot pedal. I am having to darn near stand on the foot pedal to turn the motor. Do you think that I may have bent the shaft?

Help please!
03-12-2011, 07:45 PM
M R Dux

Bent shaft would cover it. A composite shaft would not bend like that. Don't feel bad, I've done the same thing myself plus some much worse over the years.
03-12-2011, 07:46 PM
CatFan

Yep, you bent the shaft.
03-12-2011, 08:13 PM
marshjohn

Can I simply purchase a new shaft and change it out myself or is it something that I will have to take to an authorized repair center?
03-12-2011, 10:40 PM
striperking

I changed one out on a MG before and it wasn't to bad of a job.Call Denny at 770-996-9014 he will ship you the shaft and walk you threw the process.If it's that hard to turn I don't think I would use it anymore until I got it fixed,could break the cable or if it has a plastic foot pedal could break it.
03-13-2011, 12:06 AM
BlackWidow

NEXT TIME......Buy a minn kota, they have a LIFETIME warranty on the shaft...
03-13-2011, 09:15 AM
wilbur

If its a metal shaft and doesnt have a kink in it just a slow bend you should be able to straighten it. Block up each end with the bend up and keep putting pressure on the bend till it moves.Use a 2x4 about 6in. long so as not to kink it. If you can tie a strap on the trailer with a loop on the end about the height of the shaft then stick a long 2x4 through the loop and pry down on the shaft from the other side of boat. What can you lose.
03-13-2011, 02:42 PM
catchncrisco

Minn Kotas warranty is "limited lifetime"..only covers defects in material and workmanship..Took a high wave up front and new max 80 came down on the side of a famous reel foot stump...bent the composite shaft and minn kota would not warrant it, out $800.
03-13-2011, 04:59 PM
wilbur

I broke mine while still under the 2 yr. warranty they fixed for nothing. The guy told me lifetime free replacement for shaft but I have to change myself or give him 60.00 to change it.
03-15-2011, 08:52 AM
BlackWidow

depends on the shop that you use I guess.
03-15-2011, 04:47 PM
Allan

Quote:

Originally Posted by catch&crisco

Minn Kotas warranty is "limited lifetime"..only covers defects in material and workmanship..Took a high wave up front and new max 80 came down on the side of a famous reel foot stump...bent the composite shaft and minn kota would not warrant it, out $800.

Replace the shaft not the whole TM. Much cheaper than $800.00.
09-16-2011, 05:13 PM
stringpuller

Quote:

Originally Posted by marshjohn

Well guys I committed one of the most embarrassing errors that a fisherman can make. I forgot to pull my Motorguide trolling motor up before taking off full throttle with the outboard. It took me a while to understand why I was getting soaked with lake water, but I finally figured it out. :(

Now to the damage part. The trolling motor is now extremely difficult to turn with the foot pedal. I am having to darn near stand on the foot pedal to turn the motor. Do you think that I may have bent the shaft?

Help please!

There is a new company down in Texas that makes a straightener that you can use yourself in such a situation. The company is Straighteneze.com. Check them out. I bought one and now it's in my boat because I bent mine too and it would take too long at a shop.