that could add down imaging to your unit?
that could add down imaging to your unit?
Only if you have an SI unit.
You need to go to HB site Humminbird » Fishfinder :: Depth Finder :: GPS Chartplotters :: Side Imaging Sonar Technology when u get there click on SUPPORT you will register your unit and it will then tell u latest down load version u u need to down from that very site to your computer, from there u will download version to a SDHC card, doesn't have to be a very big one as downloads aren't all that big. Then put down loadcard into 1197 and follow instructions, will take about 3-4 minutes for 1197 to do download. Just make sure 1197 is hooked up to a good battery before downloading because if U run short of power during download your FF will most likely go to sleep & then can only be woke up by the HB factory fine folks. Hint--write down HB customer service phone from web site so if YOU need help call them and they will gladly walk you thru whole thingy thing........Really its easy and keep HB phone # handy you will do good................;)
Thanks very much.
On the 1197si is the latest update the humminbirdpc version 3.2.o
No reggis, that is the latest version of the HumminbirdPC program. The latest software for the 1197c Si unit is version 4.950 which should also be listed.
Reggis
before downloading to 1197 first go in to menu & set 1197 to FACTORY DEFAULTS.. Just press MENU twice. Go to SETUP tab. Find selection for RESTORE DEFAULTS press right arrow, then I beliee you have to click on yes.
I think the 5.32 will have it in it If not I think I still have it on a SD card.
DI is included in the 5.320. Just DL it & it will catch you up.
reggis, it is , also a good idea to have a copy of your present software version on hand when you do the update in case something goes awry in the update process...
Find out what version of SW is on your unit...then go here.....Login
Download your current version onto a separate SD card and keep it with your unit...
Sonar unit software updates can go awry for many different reasons and having a copy of your SW version on hand will enable you to revert your unit to your "Old" SW version if need be....
Rickie (an almost satisfied HB owner)
when i power the 1197 up it says i have the 4.750 version and no update needed. So do i need to download the 5.320 and i will be up todate
Software version 4.950 is an older version of software that has since been replaced by the newer 5.320 version. Download that to an SD or SDHC memory card and update your unit. Here is a link to a video on how to update your unit:
YouTube -