Attachment 45280
Attachment 45281
I got about $4.37 in this one vs $34.99 at Cabelas.
Ifn you want one and I make it they'll be $50 + lunch.
Attachment 45280
Attachment 45281
I got about $4.37 in this one vs $34.99 at Cabelas.
Ifn you want one and I make it they'll be $50 + lunch.
Looks pretty sturdy Minner, don't see any duck tape either.
looks good, Minner! Do you deliver?
that's pretty sharp bud and looks real easy to make. Tin snips and some paint is all it took, right?
Minner don't u still owe me a FREE lunch?
Cn- Fer an additional $100 I'll deliver.
DD- You gotta commit some lunch money before I tell ya how. (It ain't metal, ya gewber)
Mo- I finally post sumthin wit some use and you wanna jack my thread. I done tolt you, patient my boy, patient.
Maj- You right. No short cuts with soggy cardboard and duct tape. (That idear sux)
inspection, I sees it now. Pretty sharp bud.
Don't ya'll listen to him. I told him how to do it. You can tell he's lying....think about it. When's the last time he came up with something useful on his own?
I rest my case.
Wannabe...
What happens when the neighbor wants his welding hood back?
It ain't no Weldin hood Mo. It's High Impact Acryllic. (Fancy plexiglass) I couldn't afford the lexan, but then I thought, I hope ain't nobody shootin at me. Can be had at Lowes.
Perty good for a gewb, nice job....
BTW I'm Mo... Thats ES... Get it straight
all the young ones look alike...... just like me and Wannabe... 'cept Wannabe is the purty one in my example. My hair is longer and wilder in the flowing dept. :D
don't think so CN!!!
I'm not EVEN going to ask you to clarify that one, Triton. :)
ES, MO, DD, G3 whats difference? I'm gonna even take DD out of that super gewberish mix. Anyway ifn ya throw em all in a hat and pull one out ya wanna stick em back in and try again.
CN, you mighta been out of pocket when I got this photo of minners fan club at Zaxby's:D
Are you saying there's something wrong with me? Hmmmm?
C'mon and just spit it out......
I was present and accounted for when Minner tolt how the Paparazzi and the throngs of fans were held back outside so as not to disturb him while he was on his date with you. We know how good you photochop so it's obvious this photo has been altered. :D
Well since ain't nobody offerin to buy me lunch and my phone ain't just Rollin in the orders, here's what ya need to make it happen fro yourself.
These specs are fer a 900 series HB.
1- 8"x18" sheet of High impact acrylic
1- Razor Knife
1- Torch or some kind of flame
1- Drill with a 9/32 bit
1- Straight Edge, Metal Ruler or Framing Square
1- Permanent Marker
About 20 min fer most. Ifn your a gewber, and you know who you are, allow 1 hour.
Now this sheet ain't sold in the correct size, so ifn you're a gewber, it'll be easier fer the gewber at lowes to cut it fer ya. I bought an 18x32 sheet and cut mine myself.
Measure 3.5" from each end and mark.
Then measure back 5" from front to back on each side on the edge of the sheet. Then mark from the front of your 3.5" mark back to your 5" mark and use the razor knife to score the plastic. Score it several times and then place on the edge of the table and break. When both angles are made. Then heat the plastic along the 3.5" line until you can bend it easily. Bend it 90 degrees and repeat on the other side. Once this has cooled, place it on your ff to make sure you ain't gewbered it up. At this time you can decide ifn you want to Velcro it or bolt it on with the gimbal screws. Ifn you wanna bolt it on you gonna have to mark the plastic about an inch and 3/8 from the back. They's a goofy lip on the back of the ff you have to fit it to. Mark the line and heat. Use razor knife while it's hot to cut the plastic. You may have to flex it a few times and then it'll break or kinda tear smooth. While the ear is still warm put shield on ff and mark the hole and drill. It needs to still be warm when you drill it or else it'll break. Repeat on other side. Then scuff with coarse grit sand paper so paint will stick.
Remember I'll do it fer $50.
It really does look good, Minnerman. :)
Good job Minner
Take notice Dondon...This is an example of non-jacked up ingenuity! OK Tracy, you owe me another lunch for the compliment!
SHO NUFF A KEEPER. Good work
Or....you could just buy a Lowrance and never need a hood!;):D:D:D
Good job Minner. Looks professional.:)
Hey, minner, that looks real good. Don't worry bout them other fellers, they's just mad cus they can't do it!
Minner.....you can make me one for my 898 that I am gonna get for Christmas. :)
and G3 said free lunches for 6 months if you build him one Minner.
I never said that Minner....but I do owe you a lunch so give me a hollar some time and we will go to Logans and get a steak. :)
looks great minner!!!!
WY? Is that wynonna? That ain't to fer. You gonna have to find you a better job. One where you can fesh, say, on Mondays or Fridays and anytime on Saturday or Sundays and maybe even on Wednesdays.
Wyoming minner
I know why hes so proud of saving the change on this thing ,,,,,,, crackle pop!!!!!!!