Printable View
I thought someone might be interested in this link. It shows how to make a 1/32 oz jig mold into a 1/24 oz mold, which I cannot find anywhere that sells this weight of jig mold. I followed the video and my heads came out to 1/24 so the video works. The link is listed below
YouTube - crappie fishing making a 1/24 ounce jighead mold
Hope this helps.
pretty cool link but he just dont show how deep you drill
When I did my molds I reamed it out until the rasp hit the bottom of the 1/32 mold. Once I saw material being cut from the bottom of the mold I stopped. I did both sides the same way and it worked well for me.
Seems like he just cleaned the edges,down to the bottom.Did'nt really change anything from the original mold,just made it a little wider around.
im going to try it
Good !! You can send me some.lol.
lol if i can get it pouring we will
Thats a good video. I made my own about 30 years ago if memory serves me right. It's my goto gill jig head but I have caught some nice Largemouth on that size fishing around cypress tree roots. Now thats fun there.
Redman
It work I did mine and they weighted within 1/100
Great video with alot of good tips,thanks Kelly.
I recall doing some testing when i made my molds and the correct size was a little smaller than 1/4 as i recall for a closer to round head
it does work everyone said so i ordered a collared 1/32 and uncollared, production molds. Will drill them out when they arrive and the open for business....!!