If any of you guys can make the small 1" split tail body, and would be interested in selling some. I would be interested in buying a few hundred.
Thanks,
Mike
Printable View
If any of you guys can make the small 1" split tail body, and would be interested in selling some. I would be interested in buying a few hundred.
Thanks,
Mike
Locator, I am sure crappieday can hook you up, if nto he can lead you to someone who can maybe
Anybody??
What color's?
I can get a mold for them but I would have to know how many your looking for. Molds arent cheap so it may be cheaper to buy the name brand ones.
I would like to have about a hundred of each of these colors
Black body/yellow stripe
Yellow body/black stripe
Green body/yellow stripe
Don't know how much trouble it is to make these little boogers, if its not worth anybodys time, tell me to shut up go buy my own mold.
THERE is a paint that is made for plastic baits, it would just be a matter of pouring the body then running the stripe down its back. It could be done on larger baits using 2 colors of plastic but when your talking about a 1 inch bait its tedious work and wouldnt be cost effective to do. the original bodies are done by a machine made just for those baits done by the 1000's per hour. You going to be hard pressed to find someone willing to do them like you want for less than factory made.
i would take and cut down the bigger ones and use that soft plastic glue and glue them back togather in the size you want...yeah they might be a lil fat but your going to save yourself a ton of money...thats just my .02
ok these arent beetle spins but wondering if something like this would work for ya the body is 1" long
http://img.photobucket.com/albums/v4...plastic001.jpg
JJ
Nice Joe I'll build a mold for the Lil' betttle's I don't have time to paint Them!
proably get'Ya 50-100 at a time! Good color to I might add need some .040 red and chartyreuse flake in B Killer!
Take Your siccors and cut a v in the tail b pretty close!
The originals were made with Vinyl .. cooked in the mold ... the mold was heated then the stripe poured in (cooked real quick) and right behind it the basic color was added then all was finished cooking ... different from using the "Hot Melt" that we use today and I think that the newer ones are made with "Hot Melt" .... painting them would be a pain.Quote:
Originally Posted by Locator79
I make the split tail (open 1 pc Mold) but in solid colors and with flake.
My 2 cents worth
JSC
Those look like the line of what I want, I looked through the site, but could not find these.Quote:
Originally Posted by Jiggin_Joe
Sorry I have'nt added these to site yet the site is still under construction:) but if you are interested PM me and ill work something out for ya.
JJ