pallets

i have came up with a crappie condo out of pallets that works pretty well...you have to take every other board off of the pallet in order for the fish to swim thru them tho...this is how is should look

the box in the center is a concrete block to keep the condo in place...there a cheap to make and last a very long time...i use copper wire to tie everything togather and sink them right on the bottom

sorry for the bad drawling but my computer paint skills arnt very good

We make some of those. We dont remove any boards though. Just tie 2-3 blocks and put a gallon jusg on top to get it floating a lil off the bottom.

Crappiekillerjigs is 1 block enough to sink 3 pallets?:confused:

i dont really use blocks since i can buy a 80lb bag of concrete for the price of two blocks...i pour half of a 5gallon bucket of crete and put a eyelet bolt in the center and use it...thats 40lbs...more then nuff weight to hold them in place

Thanks

yup no prob....the good thing is i can make about 10-15 of these in a hour with ease...i have been fishing one that has been in for 5 years now and it still isnt rottin

Take 6 pallets and make a cube. Put an 80 lb bag of concrete inside and push it over. The concrete will set upo on its own. They will last several years and if not in a hard current won't move. During the spawn they are tough to beat.

i will have to try that...

Gives me an ideal, a lot of the spring time action is very shallow 3' and less, I may take some pallets and cut them in halve making the triangle so the top is below the surface. Taking off the lowest plank will proably be good. May remove a couple planks off the lower pallet so fish can get at the bottom, maybe even dump a little sand and pea gravel where I remove the planks. This weather is so lousy I think I will build a half dozen this weekend.

We took pallets to the lake when water was low. Drove stakes into the ground and attacked the pallets in a cube. Leaving about 6 inches open at each corner. When water came up, we could wade out to the pallets and fish the sides that were protected from the waves.

no wade fishing here but i might try this in some areas....they stopped us from wading 2yrs ago and i sucks because we use to wade around some beds in 2-3fow and limit out(25) in a hour or less

Oh man, that's a killer!
We wade and catch fish in 4" of water.
Bobber on the hook if using minners.

tell me about it....we was catching SLABS fishing 4in deep....they would splash when they hit the jig since it was pretty much on the top of the water....we are trying to get it over turned but dont know if it will happend or not

That looks like a good idea. May have to try that...