Printable View
Here's a shot of a mold I just finished. I've never poured plastics so I don't know if it will work or not! Would appreciate some advice on getting started. What basic materials are needed, and so on. The pic don't show the detail well on here , but here it is.
looks good, if you have problems filling the mold you may need to vent the legs to allow the air to get out. Most everything you need you can get from lurecraft. plastic (SOFT) coloring glitter.ect.
Nice mold
Check out;
del-mart.com (custom old maker web site)
tackleunderground.com (ton of plastic info, limited puplic access)
Definitely a good-looking mold. When you get some of them made up please post them so we can see them I might be very interested bob.
Thanks folks, I will post some pics when I get some made.
i think crappieday is right...had a mold with legs like that and it wouldnt pour right but vented it and it pours like a champ...plastics are pretty easy to pour once you find your right temp range
I've got tons a bass worms. Can they be remelted and poured into something I can actually use..,.cause the crappie in my neighborhood choke on a 7": worm...lol.
yeah you can remelt plastics but the colors are going to run togather...but better then nothing
I make plastics that look just like those 2 and they work great!! Just vent the legs like mentioned and you will have no problems. Great looking job on the mold
JJ
if these wont pour for you buddy" try an injector syringe from Janns,it looks a lil thin in da skin"mama kin!:D
You can melt the plastic worms and pour with them. I have made hundreds of jigs with old bass worms. The trick is melt the worms slowly in a microwave. If you try to melt them quickly the plastic will burn. I use an old low wattage microwave and have never burned any in it. Cut your worms into small pieces and put them in a Pyrex measuring cup. Microwave for 30 seconds and then stir. repeat this until they turn liquid and pour. You will learn all the tricks as you go along.Quote:
Originally Posted by Nightprowler 64
Your mold looks good. You just need to Vent the legs as stated. You can scribe lines from the legs on one side of the mold with a razor blade and then take the high spots off with some sandpaper. They may still not want to pour. Most small stuff is injected. I made a mold also for injecting but i still have not made a injection pot or injector. I had a mold made by a tackle maker then copied the design and made the second one myself with 50 cavaties. Also about 5 jighead molds. How well did your mold halfs line up? My first one sucked, drilling the dowel pin holes just didnt cut it. I had to go to circular pocket milling to get it done right. I even did 2 on the manual mill without a dro, and the pins were off by .005". The CNC was the best, takes a bit to learn the programming though.
http://onfinite.com/libraries/1281240/b73.jpg
http://onfinite.com/libraries/1432214/bca.jpg
nice job on those
I poured some tonight. Just got my plastisol. They do need vented like you all said.The tails didn't fill completely. I think I will vent them , and maybe build a injector. Robbor I didn't have any trouble getting the halves to line up. I used a cnc to machine these.
Great job ... If you want an injector (hand type) check Out Bears Baits & Del Mar Molds ,,, course if you made the molds you will more than likely enjoy making the injectorQuote:
Originally Posted by jigtwins
Let us know how you do.
JSC
I like them all,especially the bottom one.If you start selling those I'd defintely be interested in some. Nice job.
Well I got all this stuff together! Built a injector and shot some samples tonight. I think I need to add some hardener though. The baits are really squishy. what ratio of plastisol and hardener do you all use? here are some pics.
Attachment 34820
Attachment 34821
Bob or Keith,Quote:
Originally Posted by magnum500
I have a few lures that are tearing. Can I reheat old lures and then dip the other lures in the heated liquid to reseal them? Could I put stick on eyes on them, dip it into the liquid plastic, and hang it to dry to?
how do you intend to use this mold are you going to individually poor for each cavity I see the mold is not made up for injection molding all at one time if it is a hand poor you may have problems of filling the cavities completely?.Quote:
Originally Posted by jigtwins
yes you can read melt them down in a microwave and dip your plastic baits into them might make sure that your use in a Pyrex cup in the microwave when you are reheating plastics make sure that you stir them quite frankly way until they are completely melted do not put them in there for more than 2 min. or I should say 1 min. and check when this starts melting starts during just keep rechecking and stirring until they are melt completely I do not use a meter to check for temperatures in the microwave we pretty well know by trial and error exactly what is going on by checking it quite frankly.Quote:
Originally Posted by shipahoy41
I find your molds quite interesting in a very very well done I would like to see more of your work in the future I hope that you will post some of these on plastic I think the guys would be very interested in some your mold making keep up the good work.Quote:
Originally Posted by robbor
Where. Did you get the mold it looks like a Jacobs but lm not sureQuote:
Originally Posted by robbor
Looks good.
Hey Bob you do realize this thread was from 2009? Right? Maybe should have started a new thread?
thank you skip maybe I should've looked closely for I said something but I did send a PM to the person who I thought made the molds I believe they may be from jigging twins I'm not sure I haven't heard back from them.Quote:
Originally Posted by skiptomylu