A new bait

Here's another new one guys 2''
Attachment 357331

like it

That is a fantastic bait! Is that a custom mold? You should sell a ton of them

Very nice Bob.

It is a tough mold to shoot . You have to have the mold very hot and you have to have the plastic around 400° and you have to shoot very fast and hold pressure

Looks good. The fish should like it

whats the name of that one?

Quote:

---

Originally Posted by impdog

whats the name of that one?

---

I don’t know have you got a good name for it

I guess with those real thin tentacles you would have to be plenty hot. Have you ever tried lubing up the mold cavity with worm oil or Pam or something? I have read that it helps get the mold filled. I have never tried it. Perhaps someone else on here has. I have a Mo Magic mold that gives me a little trouble at times but I just seem to avoid using it. Maybe I should get it out and give her a try with some oil

Quote:

---

Originally Posted by KO Joe

I guess with those real thin tentacles you would have to be plenty hot. Have you ever tried lubing up the mold cavity with worm oil or Pam or something? I have read that it helps get the mold filled. I have never tried it. Perhaps someone else on here has. I have a Mo Magic mold that gives me a little trouble at times but I just seem to avoid using it. Maybe I should get it out and give her a try with some oil

---

I have had mo Magic molds they can be a little bit finicky at times you may want to shoot them pretty fast and hold pressure and try that with them just make sure you run your plastic about 350° you may want to heat up your injectors if they are cold also you may want to put your molds into a toaster oven and warm them up see if that helps you. This mold here I had to shoot very fast the plastic was 350° and you have to hold pressure and shoot fast it helps like I said to heat up the molds in the injectors.
Attachment 357364