Flatlining jigs....would somebody describe and explain this method please?
Printable View
Flatlining jigs....would somebody describe and explain this method please?
Long lining not flat lining. There are some on here that do it , I am not one . Someone will explain it in a while, but it is just another method of jig fishing with light jigs witha lot of line out to get jigs away from boat.
Basically, as I understand it...take your crankbaits off and tie on jigs, then slow way down and you're flatlining/long lining basically. Spose to be deadly at times......matter of fact, wasn't the guy that whipped us all at the first FJ last year? Can't remember his name at the moment. Might be wrong about the FJ, but he and his partner took a bunch of money from folks with the method last year.
Wannabe...
No weights....just jigs,pulled way behind the boat...is that right? What weight jigs do they normally use for this.
G3 , go to top of page under search topic and type in Long Lineing and there will be numerous threads on the subject>
When I move from one spot to another in a small lake and drag my jig along behind me I'll catch an occasional fish. Always wondered what they called that, besides catchin fish.
Long Lining for Crappie
For those of you that are not familiar with this way of fishing it is fun and you can cover a lot of water.
I start out with 1- 1/16 teezur jig heads on each rod I tie them with a loop knot about 12 to 14 inches apart I place a southern pro hot grub on road runner jig head using different colors until I find what the fish want if it is cloudy start with a dark color if it is sunny use a light color. Now I use a 14, 12, and 10 bnm pro staff placed in rod holders out the right side of the front and the same on the left. If I have clients in the back they have 10 bnm pro staff placed in rod holders pretty much straight out. I use a gps to watch my speed and I start out at 0.5mph when I start moving I begin to get the baits in the water. Start with your 10 first then the 12 and last the 14 this will keep from getting the bait tangled together in the back of boat work from the inside out. Throw the baits about 20 to 30 behind the boat. Now that we have our baits in the water I am going to start in the channel in about 14 of water and watch my speed and sonar. I will work the deeper water first and move into more shallow water until I find the fish. Once I find fish I pay close attention to my speed where I can go back over them again. If I am not catching fish I change my speed a little at a time this will adjust the depth of your bait. Now you cannot turn your boat to quick so you have to plan ahead to turn the boat around because you have to make a wide sweeping turn or real up and then turn if you dont have room to make the wide turn. I will pull jigs anywhere from 16 of water to 3. When you first try this you will get tangled up some and even after you have done it awhile you will still tangle up some but it is a great way to locate some fish and this will work all thru spring until the fish go back deep for the summer. I like the road runner jig heads because they add flash and vibration southern pro has many colors to choose from. I use a hi Vis 6# test line this helps me see if my lines do get crossed up.
Well, I talked to one of the Crappie Master's guy for a while and that was his prefered method. From what he told me, it's kind of an art to get the jigs to the depth you want. Lot of trial an error calculating line size, weight, boat speed wind, how far back and current if any. He said generally he's pulling 1/16 of 1/32, some heavier if pulling road runners because the resitance of the blade can make it rise in the water column.
When you say "way behind" the boat, that's subjective. He had all small spinning reels and even if he had 4 lb line, max line count would only be about 150 ft. I'm guessing distance varies, but probably between 50 and 100 depending.
I said I was gonna try it this past year, but never really got off the cranks long enough to give it a shot. Hard to incorporate a lot of new stuff as little as I actually get to fish.
Wannabe...
I use 1/16-1/24/or1/32. Usually do it when schools of shad are out in open water, any curly tail jig will work , i like to use this method in water less than 10ftw. Its deadly on butla.
Flat lining is something you do at the end of an operational procedure that went bad....very bad. Now long lining on the other hand is basically practice for crankbait season. It gets you off the front of the boat and in the back were you should be.:D
It lets you test your rod holders and line spread and practice making shallow turns pretty much fine tuning your skills for crankbaits.
Getting some good info here....I can't wait untill Maj sees this. :D Hey Maj....we gots us another method, LOL...gets to buy more stuff. :D
I was going to respond but I think he covered it above. We usualy longline at speeds between .7 mph to 1.1 mph. I know some folks that will "speed troll" around 1.4 mph to 1.6 mph. Great method when the crappie are schooling in open water.Quote:
Originally Posted by satdoc1
Thx I went this morning to a creek channel off of a lake, it was full of shad, average depth of water prolly 7ft. There are guys catching them there right now. I jigged for 3 hours, nothing. Gonna try this as soon as I get a chanceQuote:
Originally Posted by jimfish
10-4 on the road runner jig heads.
I'm all over it G-3. Let's see, that's some new jigs, with spinner blades, three different weights, new 8lb line, so add the $$ n $$$$ + $$ equals :eek::eek::eek:Quote:
Originally Posted by G-3 Fisherman
Hey Maj, Think ya might as well go ahead and purchase some STOCK in Bps cause as much as you spendin , IT HAS GOT TO GO UP!
Just phoned my broker.Quote:
Originally Posted by satdoc1
Actually its one of the least expensive methods to fish. I fish from the front and only use 4 poles a 12ft and a 10 ft out each side.I like to go kinda slow.But if the wind is kicking up i put my back to the wind and let out about 20ft of line.
Hey its only $$$$$$$, cant take it with ya .....Quote:
Originally Posted by majflyboy
lolQuote:
Originally Posted by yikess
When using road runners for this....which do you like best? The colorado blade or the willow leaf blade?
I use a 1/24 oz with a small blade i make my own.Quote:
Originally Posted by G-3 Fisherman
OK....another question for you road runner guru's.....silver blades or gold blades? Which is best?
Always present both and let the fish tell you. It depends on their activity level, light, water clarity etc.Quote:
Originally Posted by G-3 Fisherman
I pour my own and use silver only
Has anyone here ever tried long lining with beetle spins...the smaller ones?
Thanks sat.....I got some lead for ya its in big ingots...I will weigh them tommorrow and let you know how much I got. I will send you a PM. Hey...if this thread takes off like Maj's thread did ole you know who ain't gonna like it, Lol. :DQuote:
Originally Posted by satdoc1
Hey, wait a minute G-3, I've got iron clad control of this thread and any thread associated with it . Send your check in the amount of $755.00 to my PM and you will be set free.:DQuote:
Originally Posted by G-3 Fisherman
I will send my first installment of 25 cents tommorrow. :) I do think that the Johnsons Beetle Spins would be great for this method though. I am sure gonna try them and see.
Mississippi Sportsman where a guy was using beetle spins and was wearing them out
This is what i use the spinner is 1/24 oz and the jigs are 1/32 or less all have # 2 red sickle hooks.
Those look good Mr. Jim. Are those the colors that you usually use?
Beetle Spins work great! Cheaper to order the pin style spinners from Jann's or Barlows and just attach to existing jig heads.
Wannabe...
Thats a good idea but don't tell Maj.....he needs to buy the high dollar stuff. :DQuote:
Originally Posted by Wannabe...
Pretty much but i do switch the bodies out on the spinners depending on conditions.Quote:
Originally Posted by G-3 Fisherman
Those Stroll'R s are great baits!!!
Yep i also like the curly tails and baby shad.Quote:
Originally Posted by mchappy
Just got back from Bass Pro G-3. OUCH!!:eek:Quote:
Originally Posted by G-3 Fisherman
Maj...now you need some road runners and also some beetlespins. Ain't this fun? :D
I went through the buy everything phase last summer, half the stuff is still sitting in the boat unopened. With a wife, a 4yo daughter, and a full time job I just dont have enough time to fish as much as I would like to. And I was starting to feel like I was not giving myself time to truly master any of the techniques I was trying because I kept jumping back and forth every time I read about a different bait or presentation or whatever.