ifinder

Can someone give me instructions on how to "save a track" from a ifinder H20 to a SD card.

Does this help?

GPS Data files:
GPS Data Files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your personal
computer. GPS Data Files stored on an MMC must be copied from
the card to the iFINDER's internal memory before the unit can read
them. Here's how:
1. Insert the MMC into your unit. Press MENU|MENU|↓ to SYSTEM
SETUP|ENT|↓ to TRANSFER MY DATA|ENT.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the iFINDER in order to activate the Load or Save commands.
To transfer data from the iFINDER to the MMC: press ENT (for
SAVE.)
To transfer data from the MMC to the iFINDER: press → to
LOAD|ENT.
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to SAVE DATA|ENT. If you wish to rename the file,
press ENT to activate the selection box. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the
name is correct. Then, press ENT|↓ to SAVE DATA|ENT.
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press EXIT.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press ENT to activate the selection
box, use ↓ or ↑ to highlight the file, then press ENT to accept the
selection. Next, press ↓ to LOAD|ENT. The unit will display a completion
message when the data transfer is finished. To return to the Page view,
press EXIT|EXIT|EXIT|EXIT.

Thanks,
I looked over that info in the manuel because I thought it related to Mapcreate and I was using it for another software program. Thanks again.