Printable View
My Elite 7ti has been giving me fits lately. When I turn it on it flashes the Lowrance logo then goes to a disclaimer page, don't use this for blah, blah, blah with an I accept button. I hit accept and it won't always go to the main screen, just stays on the disclaimer screen. Sometimes I can't get to the main screen at all, other times it takes 5-10 minutes before it will. Any ideas on what is causing this and how to fix the problem? I have never done any updates on the unit.
Low power can sometimes create gremlins like this ...
Can you verify you have good power ... ??
Rickie
Like Rickie said make sure you have good voltage if that don’t work try a reset,soft reset, then a hard reset if the first two fail, export your wpt/trails to a sd card be before a hard reset.. https://youtu.be/wYWsq2keMPA?si=Crx8IfX8zGBG64um
If you haven't already, pull power from the back and let sit for a minute or so. Then plug it back in to see if that helps. Sometimes you just get lucky!
They are real picky about a good ground as well. If you are trying to power it up and your not on the water, try holding a finger on the battery ground terminal while touching the accept button.