Printable View
Just got done wiring up my scope to a new to me boat, and the scope won’t stay on. It will show panoptix then go right off. I keep getting a message saying that the transducer isn’t connected and to turn off unit and restart. I have restarted several times and keep getting that message. Also, the little light on the black box blinks red with a green thrown in sometimes.
Sent from my iPhone using Crappie.com Fishing mobile app
Call garmin. You'll probably have to tell them the sequence of the flashes inorder for them to be able to tell you what the problem is.
Is your battery charged,have saw stuff like that wirh a drained battery.
Sent from my SM-S515DL using Tapatalk
I think mine did that and I had to adjust the alligator clips on my battery again for it to work. :dono Could double check connections
Does sound Like low voltage cut out
I talked with a guy at a boat shop this morning, and he says that it sounds like it needs to be updated.
Sent from my iPhone using Crappie.com Fishing mobile app
Is this a new livescope install,is it a 32 or 34 livescopeQuote:
Originally Posted by Nutbush
Sent from my SM-S515DL using Tapatalk
No, it was used before and taken off. If the 34 is the latest one, then it must be the 32Quote:
Originally Posted by blueball
Sent from my iPhone using Crappie.com Fishing mobile app
If it was used before and worked it shouldnt need an update.Heres a pic of a 32 andv34 to show the difference.Attachment 450284Attachment 450285Quote:
Originally Posted by Nutbush
Sent from my SM-S515DL using Tapatalk
Yea it’s a 32
Sent from my iPhone using Crappie.com Fishing mobile app