Printable View
Have any of you used a flexible extension (for drills)to turn your independent livescope pole? I made a mount out of PVC and am looking to make it more user friendly. Was thinking about using a flexible extension so that I can easily sweep and adjust.
Sent from my iPhone using Crappie.com
Share some pictures, of what your doing. That way others can better give advice.
I’m out of town right now, but can share when I get back. Have a basic PVC setup, but looking to add something to turn it without having to physically touch the PVC pole. I was thinking about installing a drill extension (similar to below), so that I could adjust the direction from near my rod holders or fish finder mount. Attachment 431614
Sent from my iPhone using Crappie.com
Now you’re gonna start Rickie brainstorming.
An old foot controlled trolling motor mount could make for some hands free turning.
You could use sch40 fittings and make a handle from pipe with an end cap
I’ve thought real hard about an old trolling motor, but couldn’t come up with a way that doesn’t add a lot of clutter. I would probably have went this route if I could have mounted it under my Terrova. I’m already looking for a better way to secure the PVC pole when transporting, so that I can get it off if the deck but not damage the transducer.
I do have a handle on the PVC, but since I put it toward the front it is on the opposite side of the rod holders.
Sent from my iPhone using Crappie.com
How did you mount it to the deck?
Ram mount on the edge of bow, under trolling motor.
Sent from my iPhone using Crappie.com
Looks very similar to the one rojoguio posted below. Attachment 431644
Sent from my iPhone using Crappie.com