Where are you mounting your Livescope black box on an RT178c? Also, are you using a disconnect of some kind so you can remove the transducer from your boat (like if left out overnight)?
Printable View
Where are you mounting your Livescope black box on an RT178c? Also, are you using a disconnect of some kind so you can remove the transducer from your boat (like if left out overnight)?
I have the 188c but I think our layouts are the same.
I mounted mine in the front tackle storage box along with battery.
It only come with a 6 foot cord from box to graph and I didn’t want to pay more for an extension. Plus very short power run to box and graph with battery there.
Attachment 422309Attachment 422310
Sent from my iPad using Crappie.com Fishing mobile app
Blackjeepjk, Thanks for the post and pics! what kind of battery is that?
Amped outdoors. 14.8v 19ah
I wanted the 32ah but was back ordered.
I’ve only had it out twice. Both times start with full charge of 16.2v, fish 6hrs and battery still at 15.2 and 15.3 volts when done. Very happy with performance, size, and weight.
I still have a little work to do as far as clean up and mounting my switches in the box.
Sent from my iPhone using Crappie.com
Garmin manual says to use 10 guage wire and 7.5 amp fuse, and that is what I used with no issues. My setup is like above, except I am running a 60ah Amped Outdoors lithium battery.
As far as switches go, any 12 volt switch will work. I used Dorman Conduct-Tite red led lever toggle switches from advanced auto for power circuits and the blue led switches for lights.
I use ancor marine tinned copper wire for ALL wiring, and ancor marine waterproof connectors. Never had an issue.
ps: I have tried the rocker switches from blue water led (now owned by th marine), but they are cheaply made and I didn't like them.
Thanks so much!
I have a 188 and I mounted mine in the foot well for the trolling motor control and made a cover for that. Works great and I use the remote control for the trolling motor, or you can use your foot control at deck level.
Sent from my iPhone using Tapatalk
Just to update. I’ve since cleaned up my wiring a little and mounted my switches. I think I am done with this part. Fished 8hrs on Saturday and battery was still at 13.7v.
I have a diy pole mount for ducer, will probably change or modify that next.
Attachment 423963
Sent from my iPhone using Crappie.com