If a spinning reel is rated to hold 100 yds. of 4 lbs. test, about how many yards of 6 lbs. test will it hold ? Will it still cast far enough if it's only got 50-60 yds. of line on it ? -Thanks
Printable View
If a spinning reel is rated to hold 100 yds. of 4 lbs. test, about how many yards of 6 lbs. test will it hold ? Will it still cast far enough if it's only got 50-60 yds. of line on it ? -Thanks
well, it might hold around 85 yards or so.. what happens when you increase line dia. too much, your casting distance will drop short due to friction of line coming off spool as is gets too low from top of spool.. but only 2#s difference won't be too bad.,.depends on line diameter.. the less line on spinning reels spool, the harder to cast, but yet too much line causes loops as it comes off without any help!! hope it helps..
Yes, if you get a thin 6# line, it might hold 100 yds of that. Most 4# line is about .20 mm in diameter. There are some monos on the market where the 6# is also .20 mm. Check out Spiderwire XXX mono or Tectan. They are both very thin.Quote:
Originally Posted by hpcrappieman
Quote:
Originally Posted by deathb4disco
Someone told me that spiderwire will damage your rod or reel somehow. Is this true?
I think when the Spiderwire braid first came out, it might have damaged some guides. I heard those stories, but don't know if it's true or not.
But I'm talking about the Spiderwire MONO, not the braid. It's very good line. Tectan is also mono.
Spiderwire doesn't do anything to rods and reels heavy mono wouldn't do. It comes down to the quality of your gear. Just remember to set the hook lighter or you will rip the fishes mouth apart.
give gamakatsu G power line a try if you can find it. The BEST Line I have ever used. I got a LARGE spool from a friend that is sponsored by them and it is really tough, limp and small diameter..007 for the 4 lb. I would imagine its pricey considering most their stuff is but for shooting docks it would be hard to beat.
the 6lb line is .008
http://www.bassnedge.com/products/gamaline.htm
Try filling the spool 1/8 to 1/16 of an inch from the outside edge.