Printable View
Gents ... this has probably been answered elsewhere ... but I have a Terrova 80 w/ Mega DI transducer ... and a HELIX 10 CHIRP MEGA SI+ GPS G3N ...
at the bow on my 18 ft pontoon ... I want to be able to get the Mega DI from the 'ducer in the Terrova and be able to get SI from the transducer on the stern.
What do I need to rig that up?
There is no Y cable to allow DI from one xducer and SI from a different xducer to 1 display (except the Y cable used exclusively with MEGA 360) ...
It is possible to have each xducer connected to a separate display and then share DI and/or SI independently thru Ethernet ..
Rickie
How about the 9 M SIDBY cable? It has one leg marked DI and one SI.
Sent from my SM-T580 using Crappie.com Fishing mobile app
The 9 M SIDB Y cable splits of the 2d wires to allow getting 2d information from a separate xducer capable of 2d ...Quote:
Originally Posted by slowhand
The wires legs are labeled SI (side imaging) and DB (Dual Beam 2d) ...
Rickie
Rickie can you refer me to a diagram,document or video that tell me what I need to buy and how to hook it up to do that?Quote:
Originally Posted by rnvinc
Using a 2 head unit setup :Quote:
Originally Posted by Crappieawlogist
*Each head unit has an xducer attached ...
*HELIX units - each head unit needs an AS EC QDE Ethernet adapter cable https://humminbird.johnsonoutdoors.c...-adapter-cable
*One ethernet cable between the 2 head units https://humminbird.johnsonoutdoors.c...letype%3A27016
Then watch this
https://youtu.be/9PVSpnGm6zE
Rickie
Thanks Rickie