Trolling motor support “bracket” for Powerdrive?

I have a MK PD V2 on my boat. Long story short, I got the trolling motor on a close out deal and the shaft is probably a touch longer than needed on my boat, but it is what it is. I’ve got the “t-rail” system on my boat, and was thinking of adding some kind of support for the shaft and head that I could mount in the T-rail, maybe with a ram mount, and then attach/clamp to the trolling motor shaft to prevent it bouncing around when going down the road. Hopefully I explained that right, I will try to get some pictures to better explain if not. Has anyone done anything similar?

I use adjustable bungee cord. Works fine.

I use a Velcro strap as I have an boat cleat right below the stowed head. Just keeps it from bouncing while trailering.


Sent from my iPad using Crappie.com

Here are your ram mounts. You can then create a T rail mount to attach it to or just create a couple of T bolts to mount base to.
Trolling Motor Stabilizers

Quote:

---

Originally Posted by Cray

Here are your ram mounts. You can then create a T rail mount to attach it to or just create a couple of T bolts to mount base to.
Trolling Motor Stabilizers

---

Thank you sir!

go with the ram mounts and the claw fixture on the end instead of the hose clamp end, much easier to use