Master crafts mens’ work

Showing off my new Podunk Ideas Livescope and HB Mega daDucer Apparatus AND Cornfield Crappie Gear double base and mount. I needed the daDucer so it could be slid back when clients are in the seats. I took a 3’ section of Excel gunnel rail and Rickie milled it to fit. Now if I’m in the right seat, I can move the Livescope and soon to be Mega360 or move it back 3’ for clients.

Both items are representative products from Master craftsmen and Sponsors here. I couldn’t be happier!Attachment 361814Attachment 361815Attachment 361816


Sent from my iPhone using Crappie.com

Very nice.

Could you post a picture of the unit retracted up and in the rear position of the track?


Looking to see how the unit lays along the gunwale when stowed.

Thanks

This is still subject to tweaking but the RAM mount will be adjusted where the Mega SI transducer won’t be hitting the gunnel. My boat is a mess and long story about the cowling on the Suzuki being off. More on that later. Attachment 361829Attachment 361830


Sent from my iPhone using Crappie.com

The swivel mount allows me to go off the angled part of the bow like normal or off the side. Rickie did an amazing job on it.


Sent from my iPhone using Crappie.com

Podunk Ideas new swivel quick detach mount will allow more options to users on where to mount da’ducer apparatus® for each user’s preferred application ...

da’ducer apparatus® swivel quick detach mount will allow da’ducer apparatus® to be mounted and fully deployed at most any flat horizontal surface around the boat ... but now allows da’ducer apparatus® to be retracted, swiveled, and stowed above and parallel to the boat gunnel out of the way without having to be mounted at the bow of the boat ...

Plus!! - da’ducer apparatus® swivel quick detach mount also allows complete easy removal of da’ducer apparatus® and any attached xducers for storage or theft protection ...

da’ducer apparatus® swivel quick detach mount will be available soon on my website ...

Note: da’ducer apparatus® swivel quick detach mount is compatible with all da’ducer apparatus® models in past and current customer applications ...

Rickie

PS: the Etrac in Doug’s pix are Excel boats proprietary boat track system and not part of da’ducer apparatus® swivel quick detach mount ... I just modified the swivel mount to work in Doug’s Etrac ... (see Excel Boats website for their Etrac products) ...

Thanks M R Dux

That was the view I was looking for.


Ricki

The base on the newer design could work very well with a swivel and quick release mount used for downriggers.

If you don't have or need a track, the 4"square mounting area required on quick release would allow users more mounting options.

Simply pull a spring loaded pin to swivel unit out away from boat and a second spring loaded pin to pull and remove the entire mount and unit.

So many unique mounting possibilities with this design.

Nice work

Well done

Looking good, very good.

Wow! your boat is the envy of every crappie fisherman.

Quote:

---

Originally Posted by deltarat

Wow! your boat is the envy of every crappie fisherman.

---

I would never go that far but I will say my sponsors like Excel take good care of me and I try my best to repay that.

Nice work and and an excellent execution. Lots of options, always a plus.