If I connect 2 Humminbird core units together without a network box and 1 has the transducer and gps hooked to it and the other has nothing but the pwr cable and network cable, what all will I be able to see on this unit?
Printable View
If I connect 2 Humminbird core units together without a network box and 1 has the transducer and gps hooked to it and the other has nothing but the pwr cable and network cable, what all will I be able to see on this unit?
Well that depends on which exact core unit models ...Quote:
Originally Posted by Crappie Shooter
Here is the ethernet sharing grid ...
https://www.humminbird.com/sites/hum...grid_v10_0.pdf
Rickie
Main unit is a 1198 and the secondary unit is a 898. Will they share gps data without having everything going to a network box?
A network box is only needed if you have more than 2 network devices....with just those 2 you wll be fine.
This site was blank for me.Quote:
Originally Posted by rnvinc
Sent from my SM-G960U using Crappie.com Fishing mobile app
You might try a different browser ... It opens for me on ios ...Quote:
Originally Posted by Pithon
Rickie
It's a PDF file ... so make sure the device you are using supports that document format.
Thanks for the replies.
The core units wont share maps, but will share waypoints. You will need 2 map cards for mapping. You will be able to see all the technology from one to the other. You will need to select on the 2nd unit that you want all the data to come from the first unit with the transducer connected to it.
Be sure and turn sonar off on unit without transducer attached.