Well i decided id learn to powder paint.
All was ok till i melted a blob of led straight down into the mouth of my heat gun.
Poof!
It was done.
Saving money sure costs a lot.
Sent from my SM-G965U using Crappie.com Fishing mobile app
Printable View
Well i decided id learn to powder paint.
All was ok till i melted a blob of led straight down into the mouth of my heat gun.
Poof!
It was done.
Saving money sure costs a lot.
Sent from my SM-G965U using Crappie.com Fishing mobile app
I hate when that happens
Sent from my SM-G950U using Crappie.com Fishing mobile app
2 inches above and a count of 8 while rotating back and forth. Try that and see how it takes paint. Can always add a count or 2.
If you dip jig in powder and it’s not shiny just lightly reheat till shines. I heat with heat gun 5 seconds, flip to other side 5 seconds and dip in powder on 1/8 jigs, 3 seconds for 1/16
Sent from my iPhone using Crappie.com Fishing mobile app
What bigtime said [emoji1360]
Sent from my iPhone using Crappie.com Fishing mobile app
An alcohol burner works pretty well, and it is silent.
Sent from my iPhone using Crappie.com Fishing mobile app
An alcohol burner is all I ever use. 1 1/2 to 2 seconds on 1/16, 1 second on 1/32 and under - rotate headQuote:
Originally Posted by CrappieDreamer
Tried to make one but it flopped.
Had an old oil lamp which is working so far.
Sent from my SM-G965U using Crappie.com Fishing mobile app
I use Harbor Freight heat gun, like $9
Sent from my iPhone using Crappie.com Fishing mobile app
Are y’all making the jigs or buying them and paint them
Sent from my iPhone using Crappie.com