Mr. Crappie Slab Shaker rods

Anyone have an opinion on these rods? Been looking around for some 14’ rods and came across these. Looking for something to fit a tight budget but not waste money if there not worth it. Thanks in advance.


Sent from my iPhone using Crappie.com Fishing mobile app

They are fine, I have 8ea and love them. They are a great deal.

I have a set of 14’s there a little bit flimsy in my opinion for spider rigging with a 1/2 oz weight because of the fiberglass construction but work fine for long lining if your looking for spider rigging rods I’d stick with graphite

I should have put that in there. I am looking at them for spider rigging


Sent from my iPhone using Crappie.com Fishing mobile app

Ozark signature series is an incredible rod for spider rigging and on sale now at grizzly jig

Quote:

---

Originally Posted by Bals gib

I have a set of 14’s there a little bit flimsy in my opinion for spider rigging with a 1/2 oz weight because of the fiberglass construction but work fine for long lining if your looking for spider rigging rods I’d stick with graphite

---

I held some at a local store & found them to be a bit on the flimsy side, as well. And, correct me if I'm wrong, but the Slab Shakers are IM6 graphite ... not fiberglass. I think you're thinking about the Slab Daddy rods (14' 2pc fiberglass)

With Slab Shakers at around the $40 price range ... I'd seriously consider checking out the Southern Crappie Rods scr143 (3pc 14' Kevlar rods) at $47 ea.

Here's a pic straight from the Southern Crappie Rod website, showing their 14' (scr143) rod's bend with 1/2oz weight :

http://www.southerncrappierods.com/w...5/11/14ft-.jpg

I use 12 footers with 3/4 oz wt on a lot of days and they do have some bend. They were on sale and i could afford to buy 8 to give spider rigging a shot.

I dont know that i will upgrade anytime soon as they work just fine. Lift fish in boat no problem.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by CrappiePappy

I held some at a local store & found them to be a bit on the flimsy side, as well. And, correct me if I'm wrong, but the Slab Shakers are IM6 graphite ... not fiberglass. I think you're thinking about the Slab Daddy rods (14' 2pc fiberglass)

With Slab Shakers at around the $40 price range ... I'd seriously consider checking out the Southern Crappie Rods scr143 (3pc 14' Kevlar rods) at $47 ea.

Here's a pic straight from the Southern Crappie Rod website, showing their 14' (scr143) rod's bend with 1/2oz weight :

---

i was referring to the slab daddy, my mistake

Jenko has some good rods and the Cypress series is a good entry level rod.

I had 6 of them and was not impressed so I got rid of them.As stated earlier they are to flimsy and whippy for my liking. i went to the Jenko Cypress and have been very pleased I could not ask for a better rod.