For Slab...January Boat of the Month Contest Picture update from old Photbucket album

This is to replace my post for Jan becasue Photbucket stopped hosting free images. I have uploaded all images here for new post to show pictures. Thanks.

http://www.crappie.com/crappie/conte...d-strike-king/

__________________________________________________ _______

I know this is not a "boat" but my kayak is my "boat" and I am proud to show here off...

Attachment 283732

Pics of upgrades....

My 2011 Hobie PA 14. Bought it locally and it is used but in excellent condition. I will try to cover all my upgrades

and items I have added to my kayak.

My manual bilge pump and sponge...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
https://www.amazon.com/ROBERTS-Q-700...eywords=sponge

My binoculars...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

My head lamp for night fishing...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

My tie down net for the stern storage...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I use this SAE to USB to charge my phone and speaker if needed...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I can check the battery level if needed using this SAE battery tender...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Bought this paddle for use on docks to pull close and pushing off or to hit and kill fish or just one handed paddling. It

is great to have!!!...
http://www.austinkayak.com/products/...nd-Paddle.html

Attachment 283733

Made my own 360 all around light. I bought some LED single bright lights from Academy when they were on sale for

.50 for two lights. I think they discontinued them. I got a piece of small PVC and glued the lights to the pvc so they

were on four sides. I then inserted the wires and the small PVC into a wider PVC to hold the wiring and lights and

added a small clear PVC tube piece around the lights to keep them waterproof. I added an SAE plug to plug into any

SAE. I also bought a small 12V double AA battery box to run the light on it's own if needed. Attached with velcro for

stand alone. Painted it and added flags and reflective tape. The base is a 1 1/4" to 3/4" reducer to fit in rod holder

middle slot...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Attachment 283734

Made my own stake out pole from 3/4" fiberglass tree stake and added a PVC "T" handle and lanyard. Bought a PVC

valve to use as a stake out pole anchor for yak. Simple turn of handle locks it in place or lets it drop to the bottom.

Added 1" PVC and coupler to bottom of valve to stick in scupper holes adn added some tape to dampen the noise and

make a tight fit. Works great!..
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
http://www.ebay.com/itm/321522588283...%3AMEBIDX%3AIT

Attachment 283736

Attachment 283735

Bought a cheap solar windshield protector from an auto parts store and cut to fit for my front and middle hatches.

Keeps it 5-10 degrees cooler in the sun I have found...

Attachment 283737


I added my own anchor trolley. Bought some heavy duty anchor line. Bought two stainless pulleys from Amazon and

two SS 2" rings from Home Depot and added guides for the top rope. Cheaper than buying a new anchor trolley kit...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Attachment 283738

I installed a ball mount on the seat for my Helix 5 SI sonar and a ball mount up front for my transducer to make sure

it is clear of my mirage drive. I plug in to the SAE port for easy removal and secure storage...


Attachment 283739
Attachment 283740
Attachment 283741

Built my own "big arse" rod holder. I used 1 1;/4" PVC and made some of the pieces removable for storage and

transport. I drilled holes where they connect and used a cotter pin to secure instead of permanent PVC glue. I started

out with just the back part with 6 rod holders and the light holder. I then saw a guy who made the extensions next to

seat and they are VERY convenient and close and can be used for trolling. I made the top rod holders movable to set

the rod pointed out for trolling. Painted everything white to reflect the sun. The black strips on the holder are velcro to

attach to items to keep from loosing them. Easy build...

Attachment 283742
Attachment 283743

Raised my seat 3 1/2" by adding 2x4's between the seat and seat mount. It is easy to build but the long bolts are hard

to find so I ahd to drill a hole for shorter screws for same effect. It is more comfortable being higher with my bad back. I

have to compensate now as center of gravity is now higher and makes it easier to tip. Will probably take it off when I go

BTB to be safe...

Attachment 283745

Now for some of the big upgrades.
Bought this battery to power everything on the yak. This battery is 35 amp hours and lasts long on a charge. I

powered my lights, sonar, spot light and charging my phone for one night and only 10% of the battery was used over a

12 hour period. It is a heavier battery (23 lbs) but I got it so I could power a trolling motor if I later add one home made.

I will post at end how I will do it...
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Attachment 283746

I wired the lights to run to switches I mounted under the seat on the middle hatch. Used waterproof switches and

used liquid tape to completely seal the connections and exposed wires. Salt water will not penetrate it or make it come

off like electric tape. I used 14 gauge wire for the lights which is fine for the small amps they use and I used heavier 10

gauge for the two SAE sockets I added to plug in SAE items like flood lights and higher amp items. Put a 15 Amp fuse

at the battery for entire system. Battery is strapped in. I figure no need to waterproof a sealed battery. If I add a

trolling motor later I will buy another battery like this one and it will sit side by side in the front hatch and I could go

all day and then some as I can use both batteries if one dies while on the water. I still have to tidy up the wires with

some zip ties as I just put the electrics in yesterday...

https://www.amazon.com/gp/product/B0002Q80RW/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Attachment 283747
Attachment 283748
Attachment 283749





The lights were bought at Academy for both the green outside lights and white interior lights. I drilled the smallest

holes I could and ran the wires and gooped it real good int he hole and where I screwed the lights to the outside to

better protect them from bumps to the side of the yak...
http://www.academy.com/shop/pdp/mari...dCatid=1021882
http://www.academy.com/shop/pdp/no-l...dCatid=1011854

Attachment 283750

Attachment 283751



That about covers it I think. If you need more information let me know. I had fun upgrading and I will be adding

some more decals to the side in the future.

Oh, and if you look at the pictures of the lights above you will see my handle I use in most forums. I got the decals

from here... http://www.decalnetwork.com

Attachment 283731

I know this is a long post. Sorry. I wanted to give as much detail as i could. Thanks for looking!!