Can I transom mount troller be converted to a bow mount
Sent from my iPhone using Crappie.com Fishing mobile app
Printable View
Can I transom mount troller be converted to a bow mount
Sent from my iPhone using Crappie.com Fishing mobile app
There is a variety of methods but from what I have seen it is cheaper to pick up a used bow mount that is not too fancy.:twocents
Depends on how you want to mount it. If you can build a bracket on front to clamp it on its fairly simple. Remove bolt that holds head to shaft, turn head around and reinstall boat. Handle will be facing prop end. Works just fine.
If it's a MinnKota, I think you can take the head off and rotate it if the wiring is long enough. Cray on the MS Board can sure answer your question.
Sent from my SAMSUNG-SM-J320A using Crappie.com Fishing mobile app
I have a 12v Minn kota 55ft pound trolling motor for sale pretty cheap if you need one
Yeah it is bow mount correct?
Sent from my iPhone using Crappie.com Fishing mobile app
Yes, I rigged a MK C2 30lb on my bow. You can remove the screw that holds the head to the shaft, rotate the head 180 degrees, and put the screw back in.
You'll either have to make/buy a 90* bracket that bolts to your bow plate or clamp it over the gunwale to mount it. If on a V bottom you'll want to make sure the shaft is long enough, on my 14' Alumacraft a 36" was just barely so, and then only if I was sitting in the front of the boat.
Regardless, a real bow mount is much easier to use. I just picked up a Minnkota foot control 40lb on CL for 160, and you can find better deals if you are patient. The extra cost is well worth it.
Absolutely. Can we plan on Wednesday around 4
Sent from my iPhone using Crappie.com Fishing mobile app
Or I can prob meet today after work.
Sent from my iPhone using Crappie.com Fishing mobile app