Transom mount transducer idea for small boats

Chipppo posted a nice idea how to avoid putting holes to mount a transducer in larger transoms. Here's one that allows the transducer to be attached and detached in less than a minute:
Attachment 275826Attachment 275827Attachment 275829Attachment 275828

The brass attachment is from the dollar store to hang wreaths.
The clamp is from Tractor Supply or any place that has hardware supplies.
The wood I had hanging around which used to be a stake.
Zip ties help stabilize the brass.

Been using this attachment for a few years and never had a problem plus the boat can barge through weed and the transducer positioned above the hull's bottom never picks weeds up.

Note: I also use the brass plate to hold my oars when not in use.

Crappie feeshermen are the most creative humans I know ...

:ThumbsUp

Rickie

same thing i did. i also put a T on it for ice fishing.

I got mine set up on an a piece of scrap 2x4,held in place with a C-clamp.been using this setup for years,very portable.

I used a piece of bar stock that is 1/8 thick. Bent it a U shape to fit over the transom. Drilled a hole in the inside part of the bar. Use a screw to keep it from coming loose.