Transport Rack to Fit These Bases?

Does or can anyone make a rod rack to fit these size bases?

The Hoover's II came on my boat. The previous owner had used them and there are three bases on each side and I was wondering if anyone made a transport rack that would fit these. I'm not sure of the size it just hit me to see if I could find a rack that will utilize these plates. A friend has Driftmasters but they are to small.

http://i31.photobucket.com/albums/c3...32CC366086.jpg

http://i31.photobucket.com/albums/c3...A894E0D5B4.jpg

My boat is a Sea Ark Stealth. I have Spyderlok's on front and back so there is no need for the Hoover II's. You can see the plates on the front, middle and back.

http://i31.photobucket.com/albums/c3...585FA18F2F.jpg

http://i31.photobucket.com/albums/c3...A96A5070BE.jpg

Drill them out and put helicoils in them to make them work with the driftmasters

I would like to keep them as is so I could use the Hoover II rod holders when I take the kids fishing. This way I could take the Spyderlok's off for more room.

Driftmasters come in the pro size (larger diameter) as well, try those.

Attachment 256737Attachment 256738Attachment 256739Attachment 256741
All three of these transport racks will screw into a 3/8 theaded hole
Cornfieldcrappiegear.com

How tall is the vertical holders?

Vertical rod rack can be adjusted from 14'' tall to 18'' tall
we have 4'' of adjustment on each unit to help set up on different deck heights from front deck to back deck.

Quote:

---

Originally Posted by cajun fryer

Vertical rod rack can be adjusted from 14'' tall to 18'' tall
we have 4'' of adjustment on each unit to help set up on different deck heights from front deck to back deck.

---

Thank you. Does the horizontal rack come in a set of two or three? Will these threads match up on my base?

Hoover rod holders were made in South Carolina. Generally, they were 1/2 inch threads. I have some "custom" made driftmaster in 1/2 inch stainless steel. These are double stack for 16 poles. They are not on my web site; however, I could send some picture if interested.

Monk

So 1/2" holders are what I need for these bases?