Is there any way I can connect the output from a Minn Kota Terrova trolling motor to two different head units?
Thanks for you input!
Printable View
Is there any way I can connect the output from a Minn Kota Terrova trolling motor to two different head units?
Thanks for you input!
You can't run them at the same time but if they both can use the MK Xducer and adaptor cable you could install an A/B switch and then you could run one or the other.
If your units are network capable, then use the Ethernet. I just added wifi to my lowrance stuff. I can see anything on the selected head unit. It is slick. I din't need it. T'was was a "want" fulfilled.
Would you know where I can get an A/B switch that will accept the connector that is coming out of the Terrova trolling motor?Quote:
Originally Posted by Barnacle Bill
With Humminbird units that can connect. I believe all you have to do is run the transducer to one head unit and then run a cable from that head unit to the other head unit and both units can read off that transducer.
Unfortunately my units are pre Ethernet and I can't connect them that way. I have to find some way like an A/B switch that I can go from the small 4 pin Terrova cable to each unit separately.Quote:
Originally Posted by Hanr3
Thanks for your suggestion.
You have to buy a adapter to connect to the Terrova cable
Sent from my SAMSUNG-SM-G891A using Tapatalk 2
Which units do you have ... ??
HB used to make the US3 switch which connected 2 head units to 1 xducer but it's been discontinued ...
https://www.amazon.com/Humminbird-72.../dp/B0042T3NN6
You'd be lucky to find one ...
I've been looking for a US3 switch for years ...
Rickie
I have the adapters that connect to the head units. I just can't seem to locate and A/B switch that will allow me to switch between the 2.Quote:
Originally Posted by "G"
Thanks for your input.