Lowrance HDI Transducer and Terrova

Hello everyone, I've did a search and read and have found out there's really no way to run the cable. I guess the only thing I can do is let the cable dangle . Is anyone else doing this and how has it worked out. Thanks

USE A RECOIL SPRING TO TIE TO CABLE AND IT WILL KEEP IT FROM DANGLING

I dhad one of these on my last boat. Podunk ideas also has a nice folding mount.

Bow mount your fishfinders transducer (any model)

I have been using this setup for about a year works great


http://i600.photobucket.com/albums/t...pscnj8nz3x.jpg



http://i600.photobucket.com/albums/t...pszc8epj2u.jpg

Cajun fryer has a system for electric steer motors ...with CNC machined custom brackets at each end to securely hold the coil ...

http://i477.photobucket.com/albums/r...psuwbxdqzv.jpg

cornfieldcrappiegear

Rickie

I couldn't get enough raps around my trolling motor. (i use a 60 inch shaft) this setup has been working for me. http://i826.photobucket.com/albums/z...psgp6jg5gc.jpg....http://i826.photobucket.com/albums/z...pszpdpqlff.jpg.

This is the setup on my boat 60" shaft 36 volt terrova with a 2d puck and structure scan.. Both cables are ran thru a piece of 3/4" plastic wire conduit to protect the cables and keep them together ...no problems so far.. I just am careful when I am putting the motor up or down to be sure nothing gets hung up

http://i600.photobucket.com/albums/t...psse7kueme.jpg
http://i600.photobucket.com/albums/t...psq2lvgtov.jpg

http://i600.photobucket.com/albums/t...psgfet7gmv.jpg

I love several ways to mount up.
Just say it can't be done and we will find a way!!