Secession Mar24

Well I made it to Secession Thursday. I talked one of my friends,Frank, into taking the ride up with me. We long lined jigs (untipped) from around 8am til 1pm. We started just above the bridge and we had 4 rods go down at once before we got all the rods in the water. That always gets you going. However they were all small ones and we decided not to keep any under 10". We culled through about 35 to get 6 that were nice fish along with two good size perch.
We were using 1/16 oz ligs, but I put on a 1/8oz and caught 4 straight on it so I figured we needed to be a little deeper. We probably had 15 or 20 that were legal, but an 8 inch crappie just looks small to me.
June bug sliders were the best color but other blue with chartreuse tails worked too. Here are a couple of shots of Frank(who is Obrage's uncle) and one of the live well. I could not get one of the pictures to rotate in my editor for some reason. I messed with it for a good while and finally gave up. Maybe one of the Mods can flip it.
Attachment 233480Attachment 233481Attachment 233482

Two things I wanted to check out was my wheel bearings and live well pump. The bearings were fine after about 100 miles nonstop so they should be good for my Florida trip next week.
I replaced the live well pump last week because my old one would not prime unless I backed up the boat with the pump running. I put in a new, 800 GPH pump,(old one was 500GPH) and darned if the new one is not doing the same thing. This started a few months back and I thought maybe the pump was bad but now I am stumped. It is thru transom mount and should work fine, but no dice. I won't be using it in Florida so I will tackle it when I get back.
Any ideas??

Glad y'all had a good time and caught some fish. I plan on doing some fishing next week while on vacation. First I have to deal with the trailer(tomorrow morning) which I think I'm going to just get a new axle. I have no idea about your pump, sorry. Thanks for the report and pics.

Good to hear y'all found some biting fish.
Ray my live well on the PanFisher I had done the same thing. The line was vapor locking. I put a tee on the line going to the live well and put a value on a short piece of pipe run off the tee. I could open the value just a little to let the air out and never had another problem.

Nice catch Ray . That is a fine little lake. Maybe we can get the Crazy Crowd over there this year. Stumpy has the solution to your pump. My SeaPro tank was same way . Put in a tee and problem went away .

Ray glad you were able to find some biting fish. I did not go sure wish I had. Thanks for sharing

Shipley! Glad you guys had fun! I have spent a lot of time crappie fishing with Franke, learned a lot about fishing from him. Nice pics. Hope to go in the am.

Here ya go Ray. Congrats on the trip and catch. Hope you get that pump problem figured out.

Attachment 233501

Not sure how my post got closed, but I have a question about the pump fix y'all mentioned. My pump mounts thru transom with just maybe a foot of rubber tubing before it goes under floor. Is that where you put the tee?

sent you a PM !!!

Sorry Ray. I somehow locked the thread when I replied.