I am sure there are some ways out there to make pvc vertical rod holders for my 14" B & M rods. I just want to temp mount them to move down the lake without having to lay them in the boat
I am sure there are some ways out there to make pvc vertical rod holders for my 14" B & M rods. I just want to temp mount them to move down the lake without having to lay them in the boat
I used 2in PVC and T's. Just cut a piece of PVC to go between each T about 3 inches long. Once you have the 3 T's pushed together set the open ends on some thing flat where they are lined up then place one in on something firm and tap on the other end to seat. You can then if you want wipe some glue around the outside of the coupling. Then cut 3 sections of pipe the length you want and insert them. I mounted mine by placing the T section on the floor and used 2 in plastic pipe clips around each standup to the side of my boat with self tapping screws.
PM sent.
Saw a guy on a tv show the other day that did something similar to what cray did, but he just took the ts and connected them together and the used two radiator hose clamps to strap it to the t-bar of his rod holder system. He painted them black and it looked good. Just take them out of the rod holder and place in the t standing straight up.