I'm looking for a mold that has 1/32 and1/16 taper jig heads.

I was looking for Lindy's Quiver Jigs but can't find any where to purchase some. So I'm looking for a mold that has 1/32 and 1/16 oz. taper jigs heads.

Not 100% sure, cannot find a pic of the quiver jig
try
Do-It Chub Jig Mold
or
Do-It Bullet Jig Molds
or
Do-It Teardrop Jig Mold

Do- it tapered tube jig model# tube - TA I think this is what you're looking for.

Just look up do-it molds you should be able to find something close to what you are looking for.

Guys here is a picyure of the jig he's looking for. May need to make larger to see well!


http://www.geocities.ws/chuckssport/quiverjigsmall.jpg

A picture of the head you are seeking would be helpful. Lindy's Lil Joe Quiver jig has been discontinued and there are a lot of images for Quiver Jigs but the packaged Quiver jig images I can find are not scalable and too small to actually see the jig head.

Here's an article from In-Fisherman and if you scroll down you'll see the Lindy Quiver Jig
Balancing Acts for Panfish Jigs - In-Fisherman

The Tube TA mold is close
Tapered Tube Skirt Jig - Sz: 1/32, 1/16 - Hk: 570 or 575 - Collar: None

but the quiver head is more like this one - but they don't have it in 1/32nd or 1/16th
Tapered Tube Skirt Jig - Sz: 1/4 - Hk: 570 or 575 - Collar: None

The chub head doesn't have the flat nose like the quiver
Chub Jig

You'll have to pick the one that looks the best to you

Fixed the link in my above post to show the jig head he's looking for!

I have a Hilts Mold ... TMJ 32-16 ... that makes "speed loader" style jigheads (tapered like a baseball bat) ... uses the 32760 or 575 hook in sizes from #6 to 1/0

I used Eagle Claw 570 hooks in #1 size and they worked fine.

Here's a link that shows the jighead : Request Rejected

As you can see from the website link, the original intention of this jighead was to be used as a "insert" style jighead ... to insert the head of the jig inside a plastic tube body. But, it may be possible to tie with this style of jighead ... :dono ... I just used those jigheads for tubes and tipping the plain heads with a minnow (way back in the distant past).

(& no, the mold is not for sale)

... cp :kewl

Thanks Guys I've checked out Do-It Molds and the closer I can get is the Chub Jig Head as far as weight goes, but is there a way for me to be able to cut off the collar & barb completely.