got my trolling motor mounted on my boat. (80# ipilot /link). the petal to release the motor to go down is really hard to get to trip. anybody else had that problem and got any suggestions.
Printable View
got my trolling motor mounted on my boat. (80# ipilot /link). the petal to release the motor to go down is really hard to get to trip. anybody else had that problem and got any suggestions.
Take the side covers off and take a look at the mechanism. There are screw pins (for lack of the right term) that the arms glide on and they are not that well made and can bend. I've had to replace one on mine. It's a pretty simple mechanism and you should be able to see if something is amiss just by eyeballing it.
Wannabe....
yeah i remember seeing those when i mounted the tm and it being used it might be bent. will check this afternoon. thanks
Deroc, try this. I found when I first got mine if pushed straight down on it it was hard. Found you can push it forward just a little with your hand and mash it down real easy. If you are using your foot that might be hard to do. The way my boat is set up I release mine by hand every time. Like WB said taking the covers off exposes everything in the mechanism so you can see exactly what it is doing.
If that's the same pin WB is talking about, mine broke.......the pin that the arms spin on. I called MK, and that pin is obsolete now, they upgrade to a better pin with two screws, where you have to drill the hole out and install them.....I ordered one for each side, and they were simple to install and they look like they are much better than the old ones. They must have had a lot of complaints about the "screw pins" breaking. I don't think that's your problem, though because I fished with mine a couple of times while it was broken until the replacements came in. Are you pushing the lever in before you try to press down? I think you have to push in and down.
This is a pic of the new pin and screws to replace the discontinued one.............minn kota item no. 2882921
Push forward and then down
What Cray and G said.....for sure!
A fresh dose of grease on a couple spots will help wonders,,,believe me
thanks guys, i thought i was pushing in first but maybe not. i will try it again this pm when i get back. i may be more electronicially challenged than i thought.