Printable View
I have a 898c hdsi. Lately my depth readings will not stay stable in all depths of water. It doesn't give an exact reading. It continually jumps from depth to depth staying with in roughly a 1 1/2 ft range. It does not stabilize and hold any depth tho
I know I'm over flat bottom. I've been fishing primarily in 16-18 ft of water. Anyone else with this problem?
Check and see if transducer is loose.
Will check when I get home tomorrow. Much obliged
Do you have only the XHS 9 HDSI 180 T connected to the 898 or are you using an additional Dual Beam xducer with the AS SIDB Y cable ...??
Rickie
Is there another sonar unit running on the boat at the same time?
Is there anyone else that you know who has a non-DI model Humminbird unit that would let you cross-test with them? This would show where the problem is: unit or boat.
Only the one connectedQuote:
Originally Posted by rnvinc
There is another unit running at the console. The two units are not connected I'll be at a tourney this weekend. Hopefully I can find another boat to test with.Quote:
Originally Posted by Humminbird_Greg
Boatbottom,
See if you have the same problem with the other sonar unit turned off. What you may be seeing is sonar-to-sonar interference (also called "cross-talk").
What make/model is this other sonar unit? You may be able to swap units around and see if either shows the same problem or not.
No way to swap. Console unit is a built in depth finder/gps on a 2003 ranger. Will be Friday or Saturday before I can test. Will let you know. Much obliged.Quote:
Originally Posted by Humminbird_Greg
Turned off the console unit resolved the problem. Much obliged.